
WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes

NanoTree: A Christmas tree Inspired by Nanoleaf panels. Play Music. Watch Tree. https://ozmoapp.com
Graphic equalizer expansion pi is an open-source printed circuit board by DavidBates, from the DavidBates/ozmotree-2019 repository on GitHub, published under the MIT licence. It is a 2-layer board of 65 × 56 mm with 20 parts on 50 nets, routed with 93 tracks and 1 via.
It is built around the SN74AHCT125N, MCP3001-I/P and M2.5. Its parts include 4 capacitors, 4 connectors, 3 resistors and 3 ICs.
NanoTree: A Christmas tree Inspired by Nanoleaf panels. Play Music. Watch Tree. https://ozmoapp.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 3 | 0.1u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C3, C4 |
| 2 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 200K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 33p | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J3 |
| 1 | Conn_01x03 | Connector_JST:JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | LOGO | Ozmo:ozmo_logo | G*** |
| 1 | MCP3001 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | MSGEQ7 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | SN74AHCT125N | Package_DIP:DIP-14_W7.62mm | U3 |
The 19 most common of 20 parts.

klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes


klein0r/pcb-ws2812-ethernet-controller
Ethernet Controller for WS2812 LED Stripes

f2daz/WLED_PCB_D1_Mini
PCB for WLED with WeMos D1 Mini and SN74AHCT125N level shifter

andrekuehne/openradfan
An ESPHome-driven controller for radiator fans to improve heat output

afoxinsocks/foxie-clock
A Nixie-like, retro, RGB LED, Arduino-powered clock


It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the SN74AHCT125N, MCP3001-I/P and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DavidBates/ozmotree-2019 repository on GitHub, at the commit this page was made from: the board is raspi/graphic_equalizer_expansion_pi/graphic_equalizer_expansion_pi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).