

InterruptAndKeyboard
Files and resources for DIY 8 bit computer video series
- Size
- 150 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 158
- Pads
- 373
- Tracks, vias
- 1,019, 221
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Sep 2018
- Updated
- 9 Jan 2026
Overview
InterruptAndKeyboard is an open-source printed circuit board by daveho, from the daveho/DIY8bit repository on GitHub. It is a 2-layer board of 150 × 90 mm with 39 parts on 158 nets, routed with 1,019 tracks and 221 vias.
It is built around the 74HCT540D, 74HCT541D and 74HCT32D, with the 74HCT11D, 74HCT138D and 74HCT574D among its other parts. Its parts include 14 capacitors, 11 ICs, 7 resistors, 3 connectors and 1 crystal.
Main components
774HCT540D
SO-20-300mil-40℃~+125℃ 1 13ns@4.5V,50pF 160uA 4.5V~5.5V 6mA 6mA 74HCT 8 Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74HCT541D
SO-20-40℃~+125℃ 1 15ns@4.5V,50pF 160uA 4.5V~5.5V 6mA 6mA 74HCT 8 Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HCT32D
SO-14-40℃~+125℃ 2 24ns@4.5V,50pF 2V 2uA 3.7V、4.4V 4 4.5V~5.5V 400mV 4mA 4mA 74HCT Series 800mV OR Gate SOIC-14 Logic Gates ROHSNexperiaGates74HCT11D
SOP-14-40℃~+125℃ 24ns@4.5V,50pF 2V 2uA 3 3 3.7V~4.32V、4.4V~4.5V 4.5V~5.5V 400mV 4mA 4mA 74HCT Series 800mV AND Gate SOP-14 Logic Gates ROHSNexperiaGates74HCT138D
SO-16-40℃~+125℃ 160uA 20ns@4.5V,50pF 3/8 4.5V~5.5V 4mA 4mA 74HCT Decoder Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT574D
SO-20-300mil-40℃~+125℃ 1 18ns@4.5V,50pF 3.5pF 3ns 4.5V~5.5V 5ns 69MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops74HCT74D
SOIC-14-40℃~+125℃ 1 2 3.5pF 3ns 4.5V~5.5V 40uA 44ns@4.5V,50pF 4mA 4mA 59MHz 5ns 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SO-14 Flip Flops ROHSNexperia74 Series
README
Episode17/HardwareDesign/README.mdHardware design
This is a snapshot of the hardware design for Episode 17, in which we test a fixed version of the CPU and glue logic PCB.
Note that the most up-to-date hardware design is always in the HardwareDesign directory in the top level of the project.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1 μF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C401, C402, C403, C404, C405, C406, C407, C501, C502, C503, C504 |
| 7 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R401, R402, R403, R404, R405, R406, R407 |
| 2 | 30pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C505, C506 |
| 2 | 74HCT32 | Package_DIP:DIP-14_W7.62mm_Socket | U406, U407 |
| 1 | 10μF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C001 |
| 1 | 11.0592 MHz | Crystal:Crystal_HC18-U_Vertical | Y501 |
| 1 | 74HCT11 | Package_DIP:DIP-14_W7.62mm_Socket | U402 |
| 1 | 74HCT138 | Package_DIP:DIP-16_W7.62mm_Socket | U503 |
| 1 | 74HCT147 | Package_DIP:DIP-16_W7.62mm_Socket | U403 |
| 1 | 74HCT540 | Package_DIP:DIP-20_W7.62mm_Socket | U404 |
| 1 | 74HCT541 | Package_DIP:DIP-20_W7.62mm_Socket | U504 |
| 1 | 74HCT574 | Package_DIP:DIP-20_W7.62mm_Socket | U405 |
| 1 | 74HCT74 | Package_DIP:DIP-14_W7.62mm_Socket | U401 |
| 1 | 87C51/89C51 | Package_DIP:DIP-40_W15.24mm_Socket | U501 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J503 |
| 1 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J501 |
| 1 | Conn_02x40_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x40_P2.54mm_Vertical | J001 |
| 1 | IDT7201 | Package_DIP:DIP-28_W7.62mm_Socket | U502 |
| 1 | R_Network08 | Resistor_THT:R_Array_SIP9 | RN501 |
The 37 most common of 39 parts.
More from daveho/DIY8bit
5- 2 layers150 × 90 mm

- 2 layers150 × 90 mm

- 2 layers150 × 90 mm

- 2 layers150 × 90 mm

- 2 layers150 × 90 mm

Similar boards
- 2 layers368.3 × 215.9 mm

- 2 layers

LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers166 × 180 mm

- 2 layers101.6 × 50.8 mm

- 2 layers226.1 × 251.5 mm

- 2 layers214.6 × 123.2 mm

- 2 layers133.3 × 85.2 mm

- 4 layers100 × 100 mm
/2%20-%20CPU%20and%20core%20components%20(Rev%203).kicad_pcb.jpg?size=s&soon)
2 - CPU and core components (Rev 3)
FredericSegard/Fr80
Z80 Homebrew computer, code-named Fre80, pronounced Freddy.
56 parts2
Questions
How big is the InterruptAndKeyboard PCB?
It measures 150 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InterruptAndKeyboard use?
39 parts, built around the 74HCT540D, 74HCT541D, 74HCT32D and 74HCT11D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InterruptAndKeyboard KiCad files?
From the daveho/DIY8bit repository on GitHub, at the commit this page was made from: the board is Episode17/HardwareDesign/InterruptAndKeyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the InterruptAndKeyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask daveho before reusing the design.