2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers
Devel
DATX02-19-04/board- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 34
- Pads
- 189
- Tracks, vias
- 281, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Jan 2019
- Updated
- 25 Mar 2019
Overview
Devel is an open-source printed circuit board by DATX02-19-04, from the DATX02-19-04/board repository on GitHub. It is a 2-layer board with 64 parts on 34 nets, routed with 281 tracks and 17 vias.
It is built around the ARDUINO UNO R3. Its parts include 23 resistors, 16 capacitors, 15 switches and 8 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R23 |
| 15 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C14, C15, C16 |
| 15 | SW | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 8 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15, R16, R17, R18, R19, R20, R21, R22 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13 |
| 1 | R_POT | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
Questions
What parts does the Devel use?
64 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Devel KiCad files?
From the DATX02-19-04/board repository on GitHub, at the commit this page was made from: the board is devel/devel/devel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Devel design in my own project?
Its repository states no licence, so its author keeps all rights: ask DATX02-19-04 before reusing the design.
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
