2 layers60 × 75 mm
2 layers51 × 65 mm
- Size
- 51 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 46
- Pads
- 103
- Tracks, vias
- 260, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 May 2025
- Updated
- 30 May 2025
Overview
Pami is an open-source printed circuit board by Darkzveller, from the Darkzveller/CodeStar_BW16 repository on GitHub. It is a 2-layer board of 51 × 65 mm with 22 parts on 46 nets, routed with 260 tracks and 7 vias.
It is built around the DRV8835DSS. Its parts include 12 connectors, 4 capacitors, 4 ICs and 2 resistors.
Main components
1Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | GROVE_I2C | 0_FootprintGe2:SEEED_110990030 | J3, J4, J5, J7 |
| 4 | Mounting_Screw_3mm | FootprintGamelGe2_v6:Mounting_Screw_3mm | J2, J8, J9, J10 |
| 3 | 100nF | FootprintGamelGe2_v6:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2, C3, C5 |
| 1 | 100µF - 25V | FootprintGamelGe2_v6:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 150k | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 220k | FootprintGamelGe2_v6:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ARU | FootprintGamelGe2_v6:Autocom2 | J18 |
| 1 | Autocom4 | FootprintGamelGe2_v6:Autocom4 | J1 |
| 1 | Batterie | FootprintGamelGe2_v6:OmnimateSL-5,08_1x02_P5.08mm_Vertical | J13 |
| 1 | DRV8835 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Herkulex | 0_FootprintGe2:TE_292161-4 | J6 |
| 1 | Régulateur de tension | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U4 |
| 1 | TCA9545APWR | TCA9545APWR:SOP65P640X120-20N | IC1 |
| 1 | ~ | bw16:BW16 | U5 |
Questions
How big is the Pami PCB?
It measures 51 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pami use?
22 parts, built around the DRV8835DSS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pami KiCad files?
From the Darkzveller/CodeStar_BW16 repository on GitHub, at the commit this page was made from: the board is Kicad/pami.kicad_pcb and its schematic Kicad/pami.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pami design in my own project?
Its repository states no licence, so its author keeps all rights: ask Darkzveller before reusing the design.
Similar boards
- 2 layers43 × 34.3 mm
- 2 layers156.6 × 125.2 mm
- 2 layers42 × 48 mm
- 2 layers75.1 × 85.2 mm
- 2 layers94 × 85 mm
- 2 layers24.8 × 32.4 mm
- 2 layers127 × 82.6 mm
PacBot 2019-2020
HarvardURC/Pacbot
Repository for the Harvard Undergraduate Robotics Club's Pacbot team
20 parts20