2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0
2 layers15.7 × 20.8 mm
PT100Stick
darkseed/PT100Stick- Size
- 15.7 × 20.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 14
- Pads
- 58
- Tracks, vias
- 106, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Aug 2020
- Updated
- 9 Jul 2020
Overview
PT100Stick is an open-source printed circuit board by darkseed, from the darkseed/PT100Stick repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15.7 × 20.8 mm with 10 parts on 14 nets, routed with 106 tracks and 3 vias.
It is built around the MAX31865ATP. Its parts include 3 capacitors, 1 resistor and 1 IC.
Main components
1README
README.mdParts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | PT100Stick:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3 |
| 1 | 430 | PT100Stick:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | Cut for 3/4 | PT100Stick:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | Cut for 4 | PT100Stick:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Ferrite_Bead_Small | PT100Stick:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | MAX31865ATP_ | PT100Stick:TQFN-20-1EP_5x5mm_P0.65mm_EP3.1x3.1mm | U1 |
| 1 | Pololu_Breakout_A4988 | PT100Stick:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | SolderJumper_3_Bridged12 | PT100Stick:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
Questions
How big is the PT100Stick PCB?
It measures 15.7 × 20.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PT100Stick use?
10 parts, built around the MAX31865ATP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PT100Stick KiCad files?
From the darkseed/PT100Stick repository on GitHub, at the commit this page was made from: the board is KiCad/pt100stick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PT100Stick design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0