2 layers70 × 70 mm
Fwrtss
ynsta/fwrtss
Open source hardware and software project of a regulated soldering station for RT soldering tips
103 parts7
2 layers15 × 25 mm
ESP12-pcb
darkomen/ESP12-pcbPcb for use an ESP12-e
- Size
- 15 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 14
- Pads
- 94
- Tracks, vias
- 122, 9
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Aug 2017
- Updated
- 11 Oct 2017
Overview
ESP12-pcb is an open-source printed circuit board by darkomen, from the darkomen/ESP12-pcb repository on GitHub. It is a 2-layer board of 15 × 25 mm with 46 parts on 14 nets, routed with 122 tracks and 9 vias.
It is built around the IRLML9301TRPBF. Its parts include 12 resistors, 6 capacitors, 2 connectors, 1 IC and 1 transistor. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdESP12-pcb
Pcb for use an ESP12-e
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistors_SMD:R_0603_HandSoldering | R10, R11, R12 |
| 3 | 2M | Resistors_SMD:R_0603_HandSoldering | R2, R4, R5 |
| 2 | 10uF | Capacitors_SMD:C_0603_HandSoldering | C1, C3 |
| 1 | 0 | Resistors_SMD:R_0603_HandSoldering | R7 |
| 1 | 0,1uF | Capacitors_SMD:C_0603_HandSoldering | C4 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C2 |
| 1 | 100uF | papayagroup:smd_5_5.4 | C6 |
| 1 | 12M | Resistors_SMD:R_0603_HandSoldering | R6 |
| 1 | 1M | Resistors_SMD:R_0603_HandSoldering | R9 |
| 1 | 2.2uF | Capacitors_SMD:C_0603_HandSoldering | C5 |
| 1 | 220k | Resistors_SMD:R_0603_HandSoldering | R8 |
| 1 | 340k | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 390k | Resistors_SMD:R_0603_HandSoldering | R3 |
| 1 | 6.8uH | papayagroup:smd_L_4532 | L1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | Conn_02x04_Odd_Even | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | J3 |
| 1 | IRLML9301TRPBF | TO_SOT_Packages_SMD:SOT-23 | Q2 |
| 1 | LBO | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP3 |
| 1 | SW_Push | papayagroup:button_4pin | SW1 |
| 1 | TPS61030PWR | papayagroup:R-PDSO-16 | U1 |
| 1 | bat | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1 |
| 1 | vdd | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP2 |
The 27 most common of 46 parts.
Questions
How big is the ESP12-pcb PCB?
It measures 15 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP12-pcb use?
46 parts, built around the IRLML9301TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP12-pcb KiCad files?
From the darkomen/ESP12-pcb repository on GitHub, at the commit this page was made from: the board is ESP12_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP12-pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask darkomen before reusing the design.
Similar boards
- 4 layers80.6 × 60.6 mm
Lorawan sensor node v2
ElektorLabs/lorawan-sensor-node-v2
Solar Powered LoRaWAN Sensor Node V2
84 parts1GPL-3.0 - 4 layers50 × 75 mm
- 2 layers108 × 75 mm
ESP32 C3 Zigbee Temp
Cath272/ESP32-Low-Power-Temp-Monitor
In the project files you may find ESP32-C3 instead of ESP32-C6. I named it wrong when i created the project. The issue is just the file names, the footprints are correct and use a C6.
75 partsGPL-3.0 - 2 layers92 × 96 mm
- 2 layers25.9 × 17.3 mm
SnapVCC
electronut/ElectronutLabs-snapVCC
A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.
25 parts77 - 2 layers25.9 × 17.3 mm
Snapvcc
elcruzo/learned-pcb-placement
GNN-guided simulated annealing for PCB component placement. We train a Graph Attention Network on SA rollout data to learn which components to move and where, then use these predictions to bias the SA search.
26 parts2MIT - 2 layers83.3 × 65.3 mm
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
46 parts14kMIT