
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

blinky board
Blinkyboardkicad is an open-source printed circuit board by darkcat773, from the darkcat773/First-Blinky-Board repository on GitHub. It is a 2-layer board of 99.5 × 55 mm with 20 parts on 19 nets, routed with 252 tracks and 21 vias.
It is built around the NE555P. Its parts include 10 diodes, 2 capacitors, 2 resistors, 2 ICs and 1 connector.
My first hardware project! Followed the Stasis(Hack Club) guide and used KiCad. The Blinky Board's LEDs map out a Cygnus(constellation).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 2 | LOGO | stars:stars2 | G***, G*** |
| 1 | 0.01 | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 1 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 4017 | blinkyboard:N16 | U2 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV1 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 99.5 × 55 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the darkcat773/First-Blinky-Board repository on GitHub, at the commit this page was made from: the board is blinkyboardkicad.kicad_pcb and its schematic blinkyboardkicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask darkcat773 before reusing the design.