Skip to the content
2 layers100 × 50 mmThermometer bausatz, the printed circuit board in 3D

Thermometer bausatz

darc-s09/thermometer-bausatz

Bausatz LED-Thermometer

Size
100 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
14
Pads
52
Tracks, vias
175, 59
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Jun 2024
Updated
14 Oct 2026

Overview

Thermometer bausatz is an open-source printed circuit board by darc-s09, from the darc-s09/thermometer-bausatz repository on GitHub. It is a 2-layer board of 100 × 50 mm with 22 parts on 14 nets, routed with 175 tracks and 59 vias.

It is built around the ATTINY24A-SSU. Its parts include 11 diodes, 3 connectors, 1 capacitor and 1 IC. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Bausatz LED-Thermometer

Dieser Bausatz beinhaltet ein LED-Thermometer mit 11 LEDs, die in einem Halbkreis angeordnet sind.

Der Bausatz wird auf öffentlichen Veranstaltungen durch Interessenten aufgebaut. Die Auswahl und Anordnung der verwendeten LEDs kann dabei nach eigenem Geschmack selbst festlegt werden. Dafür wird ein kleiner Steckbrett-Adapter verwendet, der statt der LEDs 11 2polige Fassungen enthält und auf dem eine spezielle Demo-Firmware läuft.

Die gesamte Elektronik wird durch einen AVR-Mikrocontroller realisiert. Außer dem Controller und den LEDs sind lediglich noch ein Kondensator von 100 nF sowie zwei Jumper für Justage und die Einstellung des Temperaturbereichs aufzulöten.

Parts

22
QtyValueFootprintReferences
11LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11
2TEST_1PTestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mmJ1, J2
1100 nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1ATTINY24A-SSUPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1BereichSMD-Jumper:JP2-SMDJP1
1DARC-LogoThermometer-Bausatz:DARC-RauteB3
1ProgrammSMD-Jumper:JP2-SMDJP2
1RoHS-LogoThermometer-Bausatz:RoHS_SilkB4
1UPDIConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ3
1battery_holderThermometer-Bausatz:Battery_holder_2xAAAB1
1~Thermometer-Bausatz:bastelecke-urlB2

Similar boards

  • 2 layers35 × 35 mmQron0b, the printed circuit board in 3D

    Qron0b

    qewer33/qron0b

    a sleek and low-power binary wristwatch

    35 parts62GPL-3.0
  • 2 layers51.3 × 18.3 mmExbike usb hw, the printed circuit board in 3D

    Exbike usb hw

    03vmate/exercisebike-usb-interface

    AVR MCU based USB interface for exercise bike

    19 parts
  • 2 layers46.5 × 30.2 mmThermometer hw, the printed circuit board in 3D

    Thermometer hw

    03vmate/pocket-ds18b20

    Battery powered DS18B20 thermometer

    16 parts
  • 2 layersPower module, the printed circuit board in 3D

    Power module

    Bakirov-Artur/PWR_MIC_LI-ION_module

    li-ion 18650 battery(foot print HB-18650-PC4), 1S PCB/PCM(XZD-YH10A-1)

    33 parts
  • 2 layersAttiny24 board, the printed circuit board in 3D

    Attiny24 board

    ildus/attiny24_board

    attiny24a-ssu pcb board for tests

    12 parts
  • 2 layers61.7 × 23.4 mmImager, the printed circuit board in 3D

    Imager

    JSkrat/imager_la

    31 partsApache-2.0
  • 2 layersMonitor, the printed circuit board in 3D

    Monitor

    ruhomor/truba-pcb-open

    24 parts

Questions

How big is the Thermometer bausatz PCB?

It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Thermometer bausatz use?

22 parts, built around the ATTINY24A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Thermometer bausatz KiCad files?

From the darc-s09/thermometer-bausatz repository on GitHub, at the commit this page was made from: the board is hardware/thermometer-bausatz.kicad_pcb and its schematic hardware/thermometer-bausatz.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Thermometer bausatz design in my own project?

Its repository states no licence, so its author keeps all rights: ask darc-s09 before reusing the design.