Skip to the content
2 layers50 × 31 mmLocoNetInterface V1.0, the printed circuit board in 3D

LocoNetInterface V1.0

danielvilas/DigitalTrains

Digital Trains

Size
50 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
17
Pads
60
Tracks, vias
110, 14
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Feb 2019
Updated
2 Mar 2025

Overview

LocoNetInterface V1.0 is an open-source printed circuit board by danielvilas, from the danielvilas/DigitalTrains repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 31 mm with 19 parts on 17 nets, routed with 110 tracks and 14 vias.

It is built around the LM311. Its parts include 11 resistors, 3 connectors, 2 diodes, 2 transistors and 1 IC.

Main components

1

README

README.md

DigitalTrains

Digital Trains is a repository for storing and sharing my DCC/LCC setups

Up to Date this contians Circuits, boards and projects usefull for my model layout. Each folder is a project I started. some are finished, others are Work In Progress

FolderDescriptionStatus1
ArduinoDCC++Board for use whit DCC++Deprecated for DccBlocks
BreakerDC breaker board, shorts protectionsFrozen, no need on DCC2
dcc-turnoutBoard to control a turnout with servoAlive - prototype phase
dcc-turnout-configTool to configure the dcc-turnout boardsAlive - conceptual design
DccBlocksComponents to create a DCC system whit DCC++. Has subprojectsStall - currently works, needs update to DCC++EX
docsDifferent documents may be usefullAlive - Slow
Esp32LccUse an ESP32 as node for LCCStall - Reading about
InterfacesReference Designs to add conectivityDone - until new needs
kibotYaml Config for kibot scripts..Done - until new needs
LibsKiCad LibrariesWIP
MimicPanelHardware and software to create Mimic PanelsWIP
pcbdrawPcbDraw LibraryWIP
STM32103_DevelSTM32F103 Custom boardDepecated for refenece repository

Versioning

First projects uses a folder per version system, easy to follow, easy to view older versions, but mess the file system.

Current system based on tags, and the creation of doc directories with PDFs of the schematic and the layers.

Tags of projects

  • db_dt_VERSION -> DccBlocks/Detection
  • dt_VERSION -> DccTurnout
  • dt_ms_VERSION -> DccTurnout/Modules/ServoPmosModule
  • db_abc_stop_VERSION -> DccBlocks/ABC/AbcStop
  • db_pd_VERSION -> DccBlocks/DccPowerDistribution
  • i_lb_esp32_VERSION -> Interfaces/LocoBufferEsp32/board/LocoBufferEsp32
  • i_lb_esp32_c_VERSION -> Interfaces/LocoBufferEsp32/board/LocoBufferEsp32Craddle

Footnotes

  1. More info inside each project ↩

  2. Let the central handle shorts :sunglasses: ↩

Parts

19
QtyValueFootprintReferences
22N3904Package_TO_SOT_THT:TO-92_InlineQ1, Q2
24.7KResistor_SMD:R_1206_3216MetricR9, R11
2470Resistor_SMD:R_1206_3216MetricR6, R8
2LEDLED_SMD:LED_0603_1608Metric_CastellatedD1, D2
2RJ12Connector_RJ:RJ12_Amphenol_54601J1, J3
110KResistor_SMD:R_1206_3216MetricR1
1150KResistor_SMD:R_1206_3216MetricR5
11KResistor_SMD:R_1206_3216MetricR3
1220KResistor_SMD:R_1206_3216MetricR7
122KResistor_SMD:R_1206_3216MetricR2
147Resistor_SMD:R_1206_3216MetricR10
147KResistor_SMD:R_1206_3216MetricR4
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1LM311Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

More from danielvilas/DigitalTrains

12
  • 2 layers100 × 88 mmArduinoDCC++, the printed circuit board in 3D

    ArduinoDCC++

    danielvilas/DigitalTrains

    Digital Trains

    94 partsMIT
  • 2 layers70 × 67.5 mmIndicatorLeds, the printed circuit board in 3D

    IndicatorLeds

    danielvilas/DigitalTrains

    Digital Trains

    90 partsMIT
  • 4 layers95 × 46 mmPowerDistribution, the printed circuit board in 3D

    PowerDistribution

    danielvilas/DigitalTrains

    Digital Trains

    84 partsMIT
  • 2 layers100 × 88 mmArduinoDCC++, the printed circuit board in 3D

    ArduinoDCC++

    danielvilas/DigitalTrains

    Digital Trains

    79 partsMIT
  • 2 layers100 × 88 mmArduinoDCC++, the printed circuit board in 3D

    ArduinoDCC++

    danielvilas/DigitalTrains

    Digital Trains

    79 partsMIT
  • 4 layers84.5 × 92 mmDriverDeskTft, the printed circuit board in 3D

    DriverDeskTft

    danielvilas/DigitalTrains

    Digital Trains

    67 partsMIT
  • 4 layers95 × 30 mmDccDecoder, the printed circuit board in 3D

    DccDecoder

    danielvilas/DigitalTrains

    Digital Trains

    66 partsMIT
  • 4 layers95 × 30 mmDccDecoder, the printed circuit board in 3D

    DccDecoder

    danielvilas/DigitalTrains

    Digital Trains

    66 partsMIT
  • 2 layers70 × 52.5 mmIndicatorLeds, the printed circuit board in 3D

    IndicatorLeds

    danielvilas/DigitalTrains

    Digital Trains

    54 partsMIT
  • 4 layers75 × 50 mmLocoBuffer, the printed circuit board in 3D

    LocoBuffer

    danielvilas/DigitalTrains

    Digital Trains

    48 partsMIT
  • 4 layers69 × 50 mmSTM32103 Devel, the printed circuit board in 3D

    STM32103 Devel

    danielvilas/DigitalTrains

    Digital Trains

    46 partsMIT
  • 2 layers100 × 50 mmBoostModule, the printed circuit board in 3D

    BoostModule

    danielvilas/DigitalTrains

    Digital Trains

    45 partsMIT

Similar boards

  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers215 × 100 mmCore, the printed circuit board in 3D

    Core

    shmoergh/hog

    Fully analog two-voice monophonic synth for live performances

    370 parts124
  • 4 layers80 × 80 mmZ5524, the printed circuit board in 3D

    Z5524

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    234 parts68GPL-3.0
  • 2 layers216 × 150 mmMotherboard-101, the printed circuit board in 3D

    Motherboard-101

    artemisamsx/artemisa

    Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer

    124 parts67
  • 2 layers101.6 × 147.3 mmKarabas pro revER, the printed circuit board in 3D

    Karabas pro revER

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    223 parts37MIT
  • 2 layers44 × 100 mmHP45 Standalone V4.02, the printed circuit board in 3D

    HP45 Standalone V4.02

    yvodehaas/HP45-standalone-controller-V4.02

    HP45 standalone controller V4.02

    90 parts36GPL-3.0
  • 4 layers55.9 × 78.7 mmSSI2130 VCO, the printed circuit board in 3D

    SSI2130 VCO

    JordanAceto/SSI2130_VCO

    VCO core built around the SSI2130 chip

    106 parts22CC-BY-4.0
  • 2 layers217.2 × 113 mmJunior interface, the printed circuit board in 3D

    Junior interface

    laurent-fr/junior_computer_replica

    A replica of the Junior Computer (a KIM-1 clone) published by Elektor in the 80's

    120 parts14

Questions

How big is the LocoNetInterface V1.0 PCB?

It measures 50 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LocoNetInterface V1.0 use?

19 parts, built around the LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LocoNetInterface V1.0 KiCad files?

From the danielvilas/DigitalTrains repository on GitHub, at the commit this page was made from: the board is Interfaces/LocoNet/LocoNetInterface_V1.0/LocoNetInterface_V1.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LocoNetInterface V1.0 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).