
Esp32-board
danielkurek/imf
Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…

Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…
Esp32-s3-simple is an open-source printed circuit board by danielkurek, from the danielkurek/imf repository on GitHub. It is a 2-layer board of 39.3 × 51.8 mm with 32 parts on 51 nets, routed with 505 tracks and 70 vias.
It is built around the ESP32-S3-WROOM-1-N8, MBR230S1F-7-FS and SK6812. Its parts include 8 capacitors, 6 diodes, 5 resistors, 3 connectors and 2 ICs. It belongs with the ESP32 boards of this library.
Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague, Czech Republic).
Author: Daniel Kurek 09.05.2024
boards - source files for devices designed for this framework (official dev modules can also be used)distance-analysis - analysis of WiFi FTM distance measurement (with measured data)mesh-visualizer - helper application for visualization of positions of devices and control states of devices through Bluetooth meshresult - results from testing of the framework on example applicationsrc - source code of the framework| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C5, C7 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C8 |
| 3 | 5k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R6 |
| 3 | LESD5D5 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2, JP3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R40 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | MBR230S1F-7 | Diode_SMD:D_SOD-123F | D4 |
| 1 | NCP186-3V3 | Custom:XDFN8 | U2 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |

danielkurek/imf
Framework for interactive distributed network of luminous devices. Devices are based on ESP32-S3. Framework was developed as part of bachelor thesis at Charles University Faculty of Mathematics and Physics (Prague…


oomlout/oomlout_oomp_project_bot_v_2

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dr-harvey/BailaBox
BailaBox - RFID enabled, ESP32-based music toy for kids that works with Home Assistant and network speakers.

azaslavskis/smart-home-software
Software for smart home project (e.g backup)

DevX-Dragon/Next-Gen-MacroPad
This is a integrated macropad with all an programmable SoC

mgiesen/Magic-Tabmount
Der "Magic Tabmount" ist eine smarte Wandhalterung für das iPad (Generation 5 bis 9). Durch ein integriertes Magnetsystem kann das iPad mit einem Handgriff an der Wand befestigt oder wieder entfernt werden.

PetrouilFan/ergon80
80% mechanical keyboard PCB: ESP32-S3, Kailh Choc V2, per-key SK6812 RGB, OLED, RTC, USB hub
It measures 39.3 × 51.8 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-S3-WROOM-1-N8, MBR230S1F-7-FS and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the danielkurek/imf repository on GitHub, at the commit this page was made from: the board is boards/esp32-s3-simple/esp32-s3-simple.kicad_pcb and its schematic boards/esp32-s3-main/esp32-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask danielkurek before reusing the design.