Skip to the content
2 layers60 × 40 mmDemo, the printed circuit board in 3D

This is a demo depository to demonstrate the deep-linking functionality via URL of InteractiveHtmlBom plugin

Size
60 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
10
Pads
36
Tracks, vias
71, 0
Pours
52
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 Jun 2026
Updated
21 Jun 2026

Overview

Demo is an open-source printed circuit board by dani007200964, from the dani007200964/InteractiveHtmlBom-Deep-Linking-Demo repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 40 mm with 19 parts on 10 nets, routed with 71 tracks and 0 vias.

It is built around the BC817 and 1N4148W. Its parts include 4 resistors, 3 diodes, 2 capacitors and 2 transistors.

Main components

2

README

README.md

Interactive HTML BOM Linking Demo

This project was created to demonstrate the linking capabilities of the Interactive HTML BOM.

The live demo found here: https://dani007200964.github.io/InteractiveHtmlBom-Deep-Linking-Demo/

Usage

You can create URL liks to components and nets like this:

  • Link to R1: ibom.html?ref=R1 -> link
  • Link to VCC: ibom.html?net=VCC -> link

Because html rules there are some specia characters, like + or - symbols and so on. It is really a pain, because PCB designs often has these characters( +3V3, -5V and so on... ). For this reason some URL woodoo is needed to 'escape' these characters. For this reason a copy link button added next to each net and component name, that makes things simple.

Designator error handling

KiCad assigns a unique identifier to every component placed on the PCB. This identifier can be used to reference a component even if its designator changes. As a result, components can be identified not only by their designator but also by their unique ID.

Unfortunately, unique IDs are usually not very descriptive ( most of the time they are just numeric values ) making them less user-friendly for everyday reference. However, they provide an important advantage: if the PCB design changes and a component receives a new designator, links can still remain valid across revisions.

For this reason, generated component links include both the designator and the unique identifier. If a mismatch is detected between the two, a warning dialog is displayed in the top-right corner of the screen. The user can then choose whether to open the link using the designator or the unique identifier.

Example of a broken link: D: R2 UID: R1

Parts

19
QtyValueFootprintReferences
6TestPoint_SmallTestPoint:TestPoint_Pad_D2.0mmTP1, TP2, TP3, TP4, TP5, TP6
210uCapacitor_SMD:C_0805_2012MetricC1, C2
2470RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R4
247kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3
2BC817Package_TO_SOT_SMD:SOT-23Q1, Q2
2CR2032 - 3VBattery:BatteryHolder_Keystone_3002_1x2032BT1, BT2
2LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2
11N4148WDiode_SMD:D_SOD-123D3

Similar boards

  • 4 layers137 × 79.5 mmTGX4, the printed circuit board in 3D

    TGX4

    hexeguitar/TGX4

    Teensy 4 based guitar amp emulator

    297 parts66
  • 4 layers65 × 30 mmSizif xxs, the printed circuit board in 3D

    Sizif xxs

    UzixLS/zx-sizif-xxs

    Smallest ZX Spectrum clone with real Z80 and FPGA

    90 parts50MIT
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    273 parts43MIT
  • 2 layers41 × 87 mmDif pressure meter, the printed circuit board in 3D

    Dif pressure meter

    ardiloot/dif-pressure-meter

    ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).

    68 parts23MIT
  • 2 layers100 × 100 mmZxuno1010, the printed circuit board in 3D

    Zxuno1010

    UzixLS/zxuno1010-board

    10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure

    233 parts23MIT
  • 2 layers74.9 × 40.6 mmAnavi fume extractor, the printed circuit board in 3D

    Anavi fume extractor

    AnaviTechnology/anavi-fume-extractor

    Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.

    34 parts17
  • 2 layers76.3 × 105.1 mmENHP eleklekha, the printed circuit board in 3D

    ENHP eleklekha

    sebmorales/ENHP

    Experiments in Networked Hardware Performance

    49 parts9
  • 2 layers37 × 90 mmESP32-BLE GSM, the printed circuit board in 3D

    ESP32-BLE GSM

    shridattdudhat/ESP01-MOSFET-Control

    Control LED or DC Motor using ESP-01!

    43 parts5

Questions

How big is the Demo PCB?

It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Demo use?

19 parts, built around the BC817 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Demo KiCad files?

From the dani007200964/InteractiveHtmlBom-Deep-Linking-Demo repository on GitHub, at the commit this page was made from: the board is pcb/demo/demo.kicad_pcb and its schematic pcb/demo/demo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Demo design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).