2 layers282.6 × 92 mm
Chavdai40
dvorak55/chavdai40
Challenge to Handle Acoustic-noise, Verify Drastic Abductive Implementation.
109 parts6MIT
2 layers
Example
danderson/kidraw2Kidraw is a library to programmatically build Kicad schematic and footprint libraries. It was created out of frustration with Kicad's inconsistent built-in libraries, and the tedium of building cookie cutter parts in…
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 16
- Pads
- 51
- Tracks, vias
- 73, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Sep 2019
- Updated
- 5 May 2024
Overview
Example is an open-source printed circuit board by danderson, from the danderson/kidraw repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 10 parts on 16 nets, routed with 73 tracks and 2 vias.
It is built around the STM32F042K6T6. Its parts include 4 capacitors, 2 resistors, 2 ICs, 1 diode and 1 inductor. It belongs with the STM32 boards of this library.
Main components
1README
README.mdKidraw
Kidraw is a library to programmatically build Kicad schematic and footprint libraries. It was created out of frustration with Kicad's inconsistent built-in libraries, and the tedium of building cookie cutter parts in the library editors.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10uF | example:Capacitor_0603 | C1 |
| 1 | 1nF | example:Capacitor_1206 | C3 |
| 1 | 1pF | example:Capacitor_(Polarized)_0805 | C4 |
| 1 | 1uF | example:Capacitor_(Polarized)_1206 | C2 |
| 1 | AP2120N | example:AP2120N_SOT23-3 | U1 |
| 1 | Inductor | example:Inductor_1206 | L1 |
| 1 | LED | example:LED_1206 | LED1 |
| 1 | Resistor | example:Resistor_0805 | R1 |
| 1 | Resistor | example:Resistor_1206 | R2 |
| 1 | STM32F042K6T6 | example:STM32F042K6T6_32-QFP | U2 |
Similar boards
- 4 layers113 × 93.7 mm
Characterizer
patrickyeon/battery-characterizer
battery tester/characterizer hardware, firmware.
217 parts4 - 4 layers52 × 74 mm
FRC Sensor CAN
barkinvar/sugerCANe
A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.
144 parts1 - 2 layers77.5 × 15 mm
Lin tester
Bartek0x00/USRTLIN-PCB
PCB files and documentation for USRTLIN converter project
37 parts1MIT - 2 layers67 × 45 mm
- 2 layers52.5 × 55 mm
- 2 layers66 × 26 mm
Altimetro
Daniel-Alencar/MiniEasy
Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com…
56 parts - 2 layers31.5 × 34.2 mm
Questions
What parts does the Example use?
10 parts, built around the STM32F042K6T6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Example KiCad files?
From the danderson/kidraw repository on GitHub, at the commit this page was made from: the board is example/example.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Example design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).