6 layers113 × 99 mm
2 layers25 × 12.2 mm
Remote rpi
danchouzhou/PiRFGain 2.4G for your raspberry pi
- Size
- 25 × 12.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 9
- Pads
- 20
- Tracks, vias
- 48, 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Nov 2022
- Updated
- 12 Dec 2022
Overview
Remote rpi is an open-source printed circuit board by danchouzhou, from the danchouzhou/PiRF repository on GitHub. It is a 2-layer board of 25 × 12.2 mm with 5 parts on 9 nets, routed with 48 tracks and 5 vias.
It is built around the LTST-C170KFKT. Its parts include 1 resistor, 1 IC, 1 diode and 1 connector.
Main components
1README
README.mdPiRF
A 2.4G Raspberry Pi nRF24L01 SPI module. Order the borad on OSH Park!
Fetures
- Support all model of Raspberry Pi (26-pin and 40-pin GPIO)
- On-board LED indicate IRQ of the nRF24
- Fit well with original Raspberry Pi Model B case
Recommended libraries
RF24 has been tested by our team. Change the CE pin to GPIO24, IRQ to GPIO25 manually.
Datasheet
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 22R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Ai-Thinker NF-03 | NF-03:Ai-Thinker-NF-03 | U1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | LTST-C170KFKT | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | LOGO1 |
Similar boards
- 4 layers100 × 100 mm
- 4 layers100 × 90 mm
Nexus pear reva
aminewe898/nexus-pear-reva
NEXUS PEAR Rev A hardware design, schematics, PCB, manufacturing review exports and engineering documentation
117 partsMIT - 2 layers82.5 × 82.5 mm
EPS V1
BrownSpaceEngineering/PVDX-EPS_V1
Avionics files related to new overhauled EPS schematics, pcb design, and documentation
197 parts - 2 layers36 × 26 mm
- 2 layers31.8 × 55.9 mm
- 4 layers54.4 × 53.3 mm
- 4 layers83 × 120 mm
Questions
How big is the Remote rpi PCB?
It measures 25 × 12.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote rpi use?
5 parts, built around the LTST-C170KFKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote rpi KiCad files?
From the danchouzhou/PiRF repository on GitHub, at the commit this page was made from: the board is kicad/remote-rpi.kicad_pcb and its schematic kicad/remote-rpi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote rpi design in my own project?
Its repository states no licence, so its author keeps all rights: ask danchouzhou before reusing the design.