Skip to the content
2 layers39.5 × 30.5 mmLED Button, the printed circuit board in 3D

Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.

Size
39.5 × 30.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
4
Pads
19
Tracks, vias
23, 0
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Sep 2026
Updated
23 Oct 2026

Overview

LED Button is an open-source printed circuit board by DamodarBarhate100, from the DamodarBarhate100/robotics-hardware-design repository on GitHub. It is a 2-layer board of 39.5 × 30.5 mm with 10 parts on 4 nets, routed with 23 tracks and 0 vias.

Its parts include 2 resistors, 2 connectors, 1 diode and 1 switch. It belongs with the robots and motor control boards of this library.

README

README.md

Robotics Hardware Design

A collection of my robotics hardware design work, covering CAD, mechanical design, 3D printing, mechanisms, and PCB design.

This repository documents my learning and development of practical hardware-design skills for building robotic systems.

Areas Covered

  • CAD & Mechanical Design

    • Fusion 360
    • Mechanical components
    • Robot mounts and brackets
    • Enclosures and chassis
    • Shafts, bearings, and joints
    • Mechanisms and linkages
    • Gear designs
  • 3D Printing

    • 3D-printable mechanical parts
    • STL/3MF preparation
    • Prototype fabrication
    • Fit and tolerance testing
    • Design iterations
  • PCB Design

    • KiCad
    • Schematic design
    • Component and footprint selection
    • PCB layout
    • Routing
    • Design Rule Checking (DRC)
    • 3D PCB visualization
    • Gerber generation

Repository Structure

text
robotics-hardware-design/
│
├── CAD/
│   ├── Fusion360/
│   ├── mechanisms/
│   └── 3d-printing/
│
├── PCB/
│   └── KiCad/
│
└── README.md

Projects

Projects will be added as I develop and test different hardware designs.

CAD / Mechanical

  • Servo Mount
  • Motor Mount
  • Sensor Mount
  • Electronics Enclosure
  • Robot Chassis Components
  • Linkages
  • Gear Mechanisms
  • Robotic Gripper Components

PCB

  • KiCad Learning Projects
  • ESP32-Based Sensor Boards
  • Robotics Controller Boards
  • Sensor and Actuator Interfaces

Design Process

I follow an iterative engineering workflow:

text
Idea
  ↓
Design
  ↓
CAD / Schematic
  ↓
Prototype
  ↓
3D Print / PCB Fabrication
  ↓
Test
  ↓
Identify Problems
  ↓
Redesign
  ↓
Version 2 / Improved Prototype

The goal is not only to create designs that look correct digitally, but to build, test, evaluate, and improve them.

Tools

  • Autodesk Fusion 360 — CAD and mechanical design
  • KiCad — PCB and schematic design
  • 3D Printing / FDM — Physical prototyping

Additional tools and technologies will be added as my hardware-design workflow develops.

Project Documentation

For significant projects, I will document:

  • Design objective
  • CAD/schematic files
  • Important dimensions and specifications
  • Components used
  • Manufacturing/printing settings
  • Design decisions
  • Test results
  • Problems encountered
  • Design revisions
  • Final results

Learning Philosophy

I am building these skills with a robotics-focused approach:

Learn → Design → Build → Test → Improve

The objective is to gradually move from basic components to complete robotic hardware systems integrating:

Mechanical Design + Electronics + PCB + Embedded Systems + Robotics

Status

🚧 Active and continuously developing

This repository contains both learning projects and original designs. Tutorial-based projects will be clearly identified and credited to their respective sources.

Parts

10
QtyValueFootprintReferences
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
15vTerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_HorizontalJ1
1LEDLED_THT:LED_D5.0mmD1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW1
1~Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2

The 6 most common of 10 parts.

More from DamodarBarhate100/robotics-hardware-design

2
  • 2 layers58.2 × 39.7 mmNE 555, the printed circuit board in 3D

    NE 555

    DamodarBarhate100/robotics-hardware-design

    Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.

    13 parts
  • 2 layers59.5 × 33.5 mmVoltage Regulator, the printed circuit board in 3D

    Voltage Regulator

    DamodarBarhate100/robotics-hardware-design

    Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.

    8 parts

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

How big is the LED Button PCB?

It measures 39.5 × 30.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED Button use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED Button KiCad files?

From the DamodarBarhate100/robotics-hardware-design repository on GitHub, at the commit this page was made from: the board is PCB/KiCAD/LED_Button/LED_Button.kicad_pcb and its schematic PCB/KiCAD/LED_Button/LED_Button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED Button design in my own project?

Its repository states no licence, so its author keeps all rights: ask DamodarBarhate100 before reusing the design.