
LED Button
DamodarBarhate100/robotics-hardware-design
Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.

Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.
NE 555 is an open-source printed circuit board by DamodarBarhate100, from the DamodarBarhate100/robotics-hardware-design repository on GitHub. It is a 2-layer board of 58.2 × 39.7 mm with 13 parts on 8 nets, routed with 44 tracks and 1 via.
It is built around the NE555P. Its parts include 4 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the robots and motor control boards of this library.
A collection of my robotics hardware design work, covering CAD, mechanical design, 3D printing, mechanisms, and PCB design.
This repository documents my learning and development of practical hardware-design skills for building robotic systems.
CAD & Mechanical Design
3D Printing
PCB Design
robotics-hardware-design/
│
├── CAD/
│ ├── Fusion360/
│ ├── mechanisms/
│ └── 3d-printing/
│
├── PCB/
│ └── KiCad/
│
└── README.mdProjects will be added as I develop and test different hardware designs.
I follow an iterative engineering workflow:
Idea
↓
Design
↓
CAD / Schematic
↓
Prototype
↓
3D Print / PCB Fabrication
↓
Test
↓
Identify Problems
↓
Redesign
↓
Version 2 / Improved PrototypeThe goal is not only to create designs that look correct digitally, but to build, test, evaluate, and improve them.
Additional tools and technologies will be added as my hardware-design workflow develops.
For significant projects, I will document:
I am building these skills with a robotics-focused approach:
Learn → Design → Build → Test → Improve
The objective is to gradually move from basic components to complete robotic hardware systems integrating:
Mechanical Design + Electronics + PCB + Embedded Systems + Robotics
🚧 Active and continuously developing
This repository contains both learning projects and original designs. Tutorial-based projects will be clearly identified and credited to their respective sources.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | **, **, ** |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 9v | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | 9v |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
The 12 most common of 13 parts.

DamodarBarhate100/robotics-hardware-design
Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.

DamodarBarhate100/robotics-hardware-design
Robotics hardware design projects covering CAD, mechanical design, 3D printing, mechanisms, and PCB design using Fusion 360 and KiCad.

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 58.2 × 39.7 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DamodarBarhate100/robotics-hardware-design repository on GitHub, at the commit this page was made from: the board is PCB/KiCAD/NE_555/NE_555.kicad_pcb and its schematic PCB/KiCAD/LED_Button/LED_Button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DamodarBarhate100 before reusing the design.