2 layers400 × 65 mm
BenchyFrontPanel
Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!
174 parts2AGPL-3.0
2 layers45 × 135 mm
GymBoard
dammitcoetzee/GymBoard- Size
- 45 × 135 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 171
- Pads
- 424
- Tracks, vias
- 1,673, 214
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Jul 2017
- Updated
- 28 Jul 2017
Overview
GymBoard is an open-source printed circuit board by dammitcoetzee, from the dammitcoetzee/GymBoard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45 × 135 mm with 86 parts on 171 nets, routed with 1,673 tracks and 214 vias.
It is built around the MCP73831, TPS63031DSK and TL3215AF160RQ, with the MBRA140 among its other parts. Its parts include 42 resistors, 26 switches, 7 ICs, 6 capacitors and 2 diodes.
Main components
4
MCP73831
UncategorisedMicrochip Technology
TPS63031DSK
UncategorisedTexas InstrumentsTL3215AF160RQ
--40℃~+85℃ 1.6N 12V 50mA Round Button SMD(SMT) Tab SPST-NO Surface Mount,Vertical - Tactile Switches ROHSE-SwitchTactile Switches
MBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdGymBoard
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100 | Resistors_SMD:R_1206_HandSoldering | R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 +10 |
| 26 | TL3215AF160RQ | lib:TL3215 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +10 |
| 13 | 10k | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R14 |
| 3 | SX1509 | Housings_DFN_QFN:UQFN-28-1EP_4x4mm_Pitch0.4mm | U1, U3, U4 |
| 2 | 10 | Capacitors_SMD:C_1206_HandSoldering | C4, C6 |
| 2 | 4.7uF | Capacitors_SMD:C_1206_HandSoldering | C1, C3 |
| 1 | .1uF | Capacitors_SMD:C_1206_HandSoldering | C5 |
| 1 | 1.0uF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 1.3_OLED_I2C | lib:1.3_OLED | DS1 |
| 1 | 1.5uH | lib:LPS3015-152MRB | L1 |
| 1 | 1K | Resistors_SMD:R_1206_HandSoldering | R16 |
| 1 | 2.0k | Resistors_SMD:R_1206_HandSoldering | R15 |
| 1 | 330 | Resistors_SMD:R_1206_HandSoldering | R13 |
| 1 | JST Right-Angle Connector - Through-Hole 2-Pin PH | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | J1 |
| 1 | LED | LEDs:LED_1206 | D1 |
| 1 | MAX1704X | Housings_DFN_QFN:DFN-8-1EP_2x3mm_Pitch0.5mm | U6 |
| 1 | MBRA140 | Diodes_SMD:D_SMA_Handsoldering | D2 |
| 1 | MCP73831 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U5 |
| 1 | PHOTON | particle:photon_smd | U2 |
| 1 | TPS63031 | lib:10-WFDFN_Exposed_Pad | U7 |
Questions
How big is the GymBoard PCB?
It measures 45 × 135 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GymBoard use?
86 parts, built around the MCP73831, TPS63031DSK, TL3215AF160RQ and MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GymBoard KiCad files?
From the dammitcoetzee/GymBoard repository on GitHub, at the commit this page was made from: the board is PCB/gymboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GymBoard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers25 × 0.3 mm
- 2 layers19 × 18 mm
Unni smartification c6-10.99-constraints
lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices
77 parts2GPL-3.0 - 2 layers49.9 × 39.4 mm
ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers35.6 × 66.5 mm
- 2 layers73.1 × 87.8 mm
- 2 layers68.6 × 53.3 mm
- 2 layers91 × 154.9 mm
