2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0
2 layers88.9 × 38.1 mm
Gh60leds
daltona/gh60leds1This project is a LED backlight extension for the GH60 Rev C pcb
- Size
- 88.9 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 47
- Pads
- 124
- Tracks, vias
- 321, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Oct 2017
- Updated
- 23 Oct 2017
Overview
Gh60leds is an open-source printed circuit board by daltona, from the daltona/gh60leds repository on GitHub. It is a 2-layer board of 88.9 × 38.1 mm with 25 parts on 47 nets, routed with 321 tracks and 40 vias.
It is built around the ATMEGA328P-AU. Its parts include 9 capacitors, 7 connectors, 3 ICs and 1 inductor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdgh60leds
This project is a LED backlight extension for the GH60 Rev C pcb
It is a kicad project
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C5, C6, C9 |
| 5 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J2, J3, J4, J5, J6 |
| 2 | 1u | Capacitors_SMD:C_0603 | C7, C8 |
| 2 | 74LS595 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U2, U3 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | DBG_UART | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1 |
| 1 | L_Core_Ferrite | Inductors_SMD:L_0603 | L1 |
| 1 | PB6 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | TP5 |
| 1 | PB7 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | TP1 |
| 1 | PD5 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | TP2 |
| 1 | PD6 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | TP3 |
| 1 | PD7 | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | TP4 |
Questions
How big is the Gh60leds PCB?
It measures 88.9 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gh60leds use?
25 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gh60leds KiCad files?
From the daltona/gh60leds repository on GitHub, at the commit this page was made from: the board is gh60leds.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gh60leds design in my own project?
Its repository states no licence, so its author keeps all rights: ask daltona before reusing the design.
Similar boards
- 2 layers50.5 × 128.5 mm
- 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm
- 2 layers73 × 94 mm
Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm
Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT