2 layers25.3 × 45.1 mm
2 layers92 × 99 mm
Esp32c3 panell
daidai100/PCB-stuffsPCB datas
- Size
- 92 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 21
- Pads
- 402
- Tracks, vias
- 1,212, 156
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Jul 2023
- Updated
- 12 Dec 2023
Overview
Esp32c3 panell is an open-source printed circuit board by daidai100, from the daidai100/PCB-stuffs repository on GitHub, published under the MIT licence. It is a 2-layer board of 92 × 99 mm with 84 parts on 21 nets, routed with 1,212 tracks and 156 vias.
It is built around the ESP32-C3-WROOM-02-H4 and NJM2845DL1-33-TE1. Its parts include 36 ICs, 24 connectors and 12 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
NJM2845DL1-33-TE1
TO-252-40℃~+85℃@(Ta) 1 14V 180mV@(500mA) 3.3V 400uA 45uVrms 75dB@(1kHz) 800mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNisshinbo Micro Devices Inc.Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdPCB-stuffs
PCB datas
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | ~ | 1_My_CustomFootprints:1608Metric | U4, U4, U4, U4, U4, U4, U5, U5, U5, U5, U5, U5, U6, U6, U6, U6 +2 |
| 12 | Conn_01x04_Pin | 1_My_CustomFootprints:Conn_Pin_1x4 | J3, J3, J3, J3, J3, J3, J4, J4, J4, J4, J4, J4 |
| 12 | Conn_01x07_Pin | 1_My_CustomFootprints:Conn_Pin_1x7 | J1, J1, J1, J1, J1, J1, J2, J2, J2, J2, J2, J2 |
| 12 | LED | LED_SMD:LED_0603_1608Metric | D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2 |
| 6 | ESP32-C3-WROOM-02 | Espressif:ESP32-C3-WROOM-02 | U1, U1, U1, U1, U1, U1 |
| 6 | LOGO | MyLogos:myQR | , , , , , |
| 6 | LOGO | MyLogos:Apo15x15 | G***, G***, G***, G***, G***, G*** |
| 6 | NJM2845DL1-33-TE1 | 1_My_CustomFootprints:DPAK228P968X238-4N | U3, U3, U3, U3, U3, U3 |
| 6 | ~ | 1_My_CustomFootprints:PCB_USB_Connecter | U2, U2, U2, U2, U2, U2 |
More from daidai100/PCB-stuffs
2- 2 layers21.6 × 47 mm
Similar boards
- 2 layers72 × 47.5 mm
PCB envmeter esp32c3
k-takata/PCB_envmeter_esp32c3
IoT environment meter using ESP32-C3 and BME680
31 parts3 - 2 layers41.5 × 33.5 mm
- 2 layers75 × 50 mm
- 4 layers137 × 72 mm
NERD HPC
TTtensan/NERD-HPC
次世代ポケコンNERD HPC。NERD HPC is a hobby personal computer for nerds.
157 parts2GPL-3.0 - 2 layers72.4 × 42.4 mm
Work
Heartland-Data/esp32-mintia-sensor-kit
本リポジトリは、MINTIAケースにESP32と各種センサを組み込む試作用ファームウェアの参考実装です。
71 parts1Apache-2.0 - 2 layers100 × 68 mm
- 2 layers99.8 × 99.8 mm
- 2 layers79.9 × 57 mm
Questions
How big is the Esp32c3 panell PCB?
It measures 92 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32c3 panell use?
84 parts, built around the ESP32-C3-WROOM-02-H4 and NJM2845DL1-33-TE1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32c3 panell KiCad files?
From the daidai100/PCB-stuffs repository on GitHub, at the commit this page was made from: the board is esp32c3d4/esp32c3d4/esp32c3_panell.kicad_pcb and its schematic esp32c3/esp32c3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32c3 panell design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).