

Py32-gamepad button ex
- Size
- 27.9 × 13.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 7
- Pads
- 26
- Tracks, vias
- 15, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Jul 2025
- Updated
- 11 Jun 2026
Overview
Py32-gamepad button ex is an open-source printed circuit board by Daft-Freak, from the Daft-Freak/DaftBlit repository on GitHub. It is a 2-layer board of 27.9 × 13.5 mm with 5 parts on 7 nets, routed with 15 tracks and 11 vias.
Its parts include 2 switches, 1 resistor and 1 connector. It belongs with the keyboards and input boards of this library.
README
README.mdDaftBlit
It's... a handheld console?

Boards
- Gamepads (x2)
board/extra-buttons: "Start/Select" buttonsboard/display: "Display" / main baard (has some sound/backlight issues)
3D Printed Parts
abxy.stlA/B/X/Y buttons (x4)console28-back.stlback half of caseconsole28-front.stlfront half of case, should be printed face downconsole28-dbg-covercover for debug port accesscontroller-mod-back.stl/controller-mod-front.stlmodifiers for multi-colour printingdpad.stldpad, requires supports and a bit tricky to printon-off-flat.stlpower buttonstart-select.stlstart/select buttons, requires supports and is very small (x2)
Other hardware
- Button pads: 2x the dpad part from a GBA SP set.
- LCD: HD28081C40 (2.8 inch 40 pin 240x320 ST7789, this pinout)
- Speaker: TODO (can't remember if it's https://shop.pimoroni.com/products/mini-speaker-8-1w or not)
- Battery: TODO
- Screws: TODO (there are four different ones)
- Cables: 1-2 "short" (50mm?) i2c cables and a longer one (100mm?), 5-pin 0.5mm ffc for start/select buttons
- Joystick: the switch joy-con one
- Brains: RP2350 stamp, the XL one if you want the power button to work
- Optional sensor stick for... sensors
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Daft_Misc:SW_Push_1P1T_NO_TSC001 | SW1, SW2 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x05_MountingPin | Daft_Misc:HCTL_HC-FPC-05-09-5RLTAG-00_1x05-1MP_P0.50mm_Horizontal | J1 |
The 4 most common of 5 parts.
More from Daft-Freak/DaftBlit
1- 2 layers76.5 × 50 mm

Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Py32-gamepad button ex PCB?
It measures 27.9 × 13.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Py32-gamepad button ex use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Py32-gamepad button ex KiCad files?
From the Daft-Freak/DaftBlit repository on GitHub, at the commit this page was made from: the board is board/extra-buttons/py32-gamepad-button-ex.kicad_pcb and its schematic board/display/pico-lcd2.8-pack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Py32-gamepad button ex design in my own project?
Its repository states no licence, so its author keeps all rights: ask Daft-Freak before reusing the design.