
Ref mic
loudifier/OpenRefMic
open hardware design for a high-performance low-cost measurement microphone

A microphone board, for board-design skills
Mic is an open-source printed circuit board by DaBiggestSeal, from the DaBiggestSeal/BOARD-mic repository on GitHub, published under the MIT licence. It is a 2-layer board with 38 parts on 38 nets, routed with 246 tracks and 242 vias.
It is built around the INA826AID, TS5A3159ADBVRE4 and AOM-5024L-HD-F-R. Its parts include 15 capacitors, 12 resistors, 4 ICs, 2 connectors and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C5, C6, C7, C8 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R5, R6, R11 |
| 2 | 10u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C4, C9 |
| 2 | 22R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R7, R8 |
| 2 | 22p | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C13, C14 |
| 2 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C11, C12 |
| 2 | 4u7 | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C10, C15 |
| 2 | 5k1 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R12, R13 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Alps_RK097_Single_Horizontal | RV1 |
| 1 | 12MHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Vertical | Y1 |
| 1 | 150R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R10 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R4 |
| 1 | AOM-5024L-HD-F-R | AOM-5024L-HD-F-R:MIC_AOM-5024L-HD-F-R | MK2 |
| 1 | AudioPlug3 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | INA826AID | INA826AID:SOIC127P599X175-8N | U2 |
| 1 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z1.6mm | D1 |
| 1 | PCM2902CDBR | PCM2902C:SOP65P780X200-28N | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | TLV70033_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TS5A3159ADBVR | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051x | J2 |

loudifier/OpenRefMic
open hardware design for a high-performance low-cost measurement microphone

tudsat-rocket/sensor_board
Note: This description might need to be updated for hardware revision 2.


punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark




Fairank/FieldDock
Compact iPhone companion hardware: editable PCB, mechanical CAD and portable firmware. Engineering prototype; original work available for noncommercial use.
38 parts, built around the INA826AID, TS5A3159ADBVRE4 and AOM-5024L-HD-F-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DaBiggestSeal/BOARD-mic repository on GitHub, at the commit this page was made from: the board is mic.kicad_pcb and its schematic mic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).