
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

PCB design for a dual LMNC envelope generator eurorack module
Lmnc envelope generator is an open-source printed circuit board by daanklijn, from the daanklijn/lmnc-envelope-generator repository on GitHub. It is a 2-layer board of 30 × 95 mm with 38 parts on 25 nets, routed with 349 tracks and 26 vias.
It is built around the TL072. Its parts include 10 resistors, 8 capacitors, 8 diodes, 2 ICs and 1 connector. It belongs with the audio and music boards of this library.
✅ PCB built and tested ✅
PCB design for a dual LMNC envelope generator eurorack module. Schematic is based on the one used by LMNC. The only difference is that I am using 100k potentiometers and to compensate for that, also five 10uF caps.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 1N4148 | Diode_SMD:D_SOD-323F | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 100k | Potentiometer_THT:Potentiometer_Default_Vertical | ATTACK1, ATTACK2, RELEASE1, RELEASE2 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R6 |
| 4 | AudioJack2 | Connector_Audio:Jack_3.5mm_Thonkiconn_Vertical | IN1, IN2, OUT1, OUT2 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | Conn_Eurorack_5 | Connector_IDC:IDC-Header_2x05_Eurorack | J1 |
The 37 most common of 38 parts.

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 30 × 95 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the daanklijn/lmnc-envelope-generator repository on GitHub, at the commit this page was made from: the board is main/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask daanklijn before reusing the design.