Skip to the content
2 layers30 × 95 mmLmnc envelope generator, the printed circuit board in 3D

Lmnc envelope generator

daanklijn/lmnc-envelope-generator8

PCB design for a dual LMNC envelope generator eurorack module

Size
30 × 95 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
25
Pads
110
Tracks, vias
349, 26
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Oct 2021
Updated
15 Jan 2022

Overview

Lmnc envelope generator is an open-source printed circuit board by daanklijn, from the daanklijn/lmnc-envelope-generator repository on GitHub. It is a 2-layer board of 30 × 95 mm with 38 parts on 25 nets, routed with 349 tracks and 26 vias.

It is built around the TL072. Its parts include 10 resistors, 8 capacitors, 8 diodes, 2 ICs and 1 connector. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

lmnc-envelope-generator

✅ PCB built and tested ✅

PCB design for a dual LMNC envelope generator eurorack module. Schematic is based on the one used by LMNC. The only difference is that I am using 100k potentiometers and to compensate for that, also five 10uF caps.

Schematic

image

Falstad simulation

image

PCB

image

Panel

image

Parts

38
QtyValueFootprintReferences
810uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5, C6, C7, C8
81N4148Diode_SMD:D_SOD-323FD1, D2, D3, D4, D5, D6, D7, D8
4100kPotentiometer_THT:Potentiometer_Default_VerticalATTACK1, ATTACK2, RELEASE1, RELEASE2
410kResistor_SMD:R_0805_2012MetricR1, R2, R5, R6
4AudioJack2Connector_Audio:Jack_3.5mm_Thonkiconn_VerticalIN1, IN2, OUT1, OUT2
2100kResistor_SMD:R_0805_2012MetricR3, R4
21kResistor_SMD:R_0805_2012MetricR9, R10
247kResistor_SMD:R_0805_2012MetricR7, R8
2TL072Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2
1Conn_Eurorack_5Connector_IDC:IDC-Header_2x05_EurorackJ1

The 37 most common of 38 parts.

Similar boards

  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers39.6 × 99.1 mmESP32-Eurorack Audio, the printed circuit board in 3D

    ESP32-Eurorack Audio

    ctag-fh-kiel/ctag-tbd

    CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

    128 parts260
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers37 × 113.9 mmVCO, the printed circuit board in 3D

    VCO

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    104 parts208
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146

Questions

How big is the Lmnc envelope generator PCB?

It measures 30 × 95 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lmnc envelope generator use?

38 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lmnc envelope generator KiCad files?

From the daanklijn/lmnc-envelope-generator repository on GitHub, at the commit this page was made from: the board is main/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lmnc envelope generator design in my own project?

Its repository states no licence, so its author keeps all rights: ask daanklijn before reusing the design.