4 layers52 × 57 mm
2 layers65 × 55 mm
Control
d0n13/catamaranPower and controls for boat v1
- Size
- 65 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 59
- Pads
- 183
- Tracks, vias
- 270, 45
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jun 2022
- Updated
- 28 Jul 2023
Overview
Control is an open-source printed circuit board by d0n13, from the d0n13/catamaran repository on GitHub. It is a 2-layer board of 65 × 55 mm with 27 parts on 59 nets, routed with 270 tracks and 45 vias.
It is built around the MCP3021A5-E and L7805. Its parts include 9 connectors, 5 ICs, 4 resistors, 2 capacitors and 1 diode. It belongs with the RP2040 boards of this library.
Main components
2
MCP3021A5-E
SOT23-5Low-Power 10-Bit A/D Converter with I2C InterfaceMicrochip TechnologyUncategorised
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdElectric catamaran
Boat with two catamaran hulls with trusters driven by a joystick. Two ESC controllers driving the trusters and everything running on a rasspberry pi pico in micropython. Battery pack is a 5s12p pack driving the trusters. 1.2kw output. 21700 batteries
Hardware designed in Fusion 360
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3 |
| 2 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | MCP3021 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3, U4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 15K | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 18K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 24v | Connector_Wire:SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm | J1 |
| 1 | Cutout | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J7 |
| 1 | D_Schottky | smd:DO220AA | D1 |
| 1 | ESC 1 PCM | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J3 |
| 1 | ESC 2 PCM | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4 |
| 1 | Joystick | Connector_Wire:SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm | J6 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-2 | U2 |
| 1 | LOGO | OneTouch_Logo:onetouchlogo | G1 |
| 1 | MCP23009-E_SS | MCP23009-E_SS:SOP65P780X200-20N | U5 |
| 1 | OLED | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | J5 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SMD Fuse | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | F1 |
| 1 | Switch 1 | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | J8 |
| 1 | Switch 2 | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | J9 |
| 1 | Switch 3 | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | J10 |
| 1 | US6K1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
Questions
How big is the Control PCB?
It measures 65 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control use?
27 parts, built around the MCP3021A5-E and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control KiCad files?
From the d0n13/catamaran repository on GitHub, at the commit this page was made from: the board is pcb/control/control.kicad_pcb and its schematic pcb/control/control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control design in my own project?
Its repository states no licence, so its author keeps all rights: ask d0n13 before reusing the design.
Similar boards
- 2 layers100 × 100 mm
Xaar128-Driver
tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs
188 parts4Apache-2.0 - 2 layers75 × 44 mm
Iot aio
RWTH-EBC/OSIGBApp
Open-Source Internet of Things (IoT) Gateways for Building Automation Applications
46 parts3MIT - 2 layers
Rpi2HAT for ver3
jacekidziak/RPI_DRON_HAT
Project of PCB with servo driver, battery voltage measurement, IMU, GPS and barometr
77 parts1 - 2 layers65 × 56 mm
RPi Hat
omc8db/DigitalVoice
An open source codec2 based handheld digital radio for VHF/UHF amateur bands
76 parts1Apache-2.0 - 2 layers65 × 56 mm
Dingo hat
CCHS-Melbourne/dingo-cap
Donkey-Hat is a Raspberry Pi Hat to drive a Donkey Car (http://www.donkeycar.com/)
98 parts - 2 layers100 × 79 mm
- 2 layers34.3 × 25.4 mm
