
Pihat
Cyclone-Robosub/PCB
This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.

This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.
Robosub PDP is an open-source printed circuit board by Cyclone-Robosub, from the Cyclone-Robosub/PCB repository on GitHub. It is a 2-layer board of 40 × 75 mm with 9 parts on 2 nets, routed with 34 tracks and 0 vias.
This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.
The intended use of this schematic is as a template when starting work on new HATs.
Features:
3D rendering:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Pin | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J3, J4, J5 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H3 |
| 2 | Screw_Terminal_01x10 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-10P_1x10_P5.00mm | J1, J2 |
| 1 | LOGO | Graphics:Cyclone_footprint | G*** |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |

Cyclone-Robosub/PCB
This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.



FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
It measures 40 × 75 mm and has 2 copper layers, 1.6 mm thick.
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Cyclone-Robosub/PCB repository on GitHub, at the commit this page was made from: the board is Robosub_PDP/Robosub_PDP.kicad_pcb and its schematic Robosub/Robosub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Cyclone-Robosub before reusing the design.