
Robosub PDP
Cyclone-Robosub/PCB
This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.

This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.
Pihat is an open-source printed circuit board by Cyclone-Robosub, from the Cyclone-Robosub/PCB repository on GitHub. It is a 2-layer board of 66.5 × 84 mm with 10 parts on 31 nets, routed with 215 tracks and 0 vias.
This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.
The intended use of this schematic is as a template when starting work on new HATs.
Features:
3D rendering:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2601-3114 | wago_terms:CONN14_2601-3114_WAG | J2, J3 |
| 1 | 2601-1110 | wago_terms:CONN10_2601-1110_WAG | J6 |
| 1 | 3V_Connect | wago_terms:CONN5_2601-3105_WAG | J5 |
| 1 | 5V_Connect | wago_terms:CONN5_2601-3105_WAG | J4 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
The 6 most common of 10 parts.

Cyclone-Robosub/PCB
This is a KiCad schematic of the outlines of a Raspberry Pi 2/3/4 HAT. The schematic conforms to the official HAT mechanical specification.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 66.5 × 84 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Cyclone-Robosub/PCB repository on GitHub, at the commit this page was made from: the board is pihat-schematic-master/pihat.kicad_pcb and its schematic Robosub/Robosub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Cyclone-Robosub before reusing the design.