

Substructure GPU
- Size
- 60 × 35 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 71
- Pads
- 246
- Tracks, vias
- 592, 95
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Aug 2024
- Updated
- 13 Jul 2026
Overview
Substructure GPU is an open-source printed circuit board by Cyberspecies, from the Cyberspecies/Synth-Head repository on GitHub. It is a 4-layer board of 60 × 35 mm with 44 parts on 71 nets, routed with 592 tracks and 95 vias.
It is built around the ESP32-S3-WROOM-1U-N4, 74HC245D653 and 10171746-00021LF, with the PMEG3050EP,115-JSM among its other parts. Its parts include 12 capacitors, 12 resistors, 8 connectors, 5 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
Main components
4ESP32-S3-WROOM-1U-N4
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules74HC245D653
SOIC-20SOIC-20-300mil Specialty Logic ROHSNXP SemiconductorsSpecialty Logic10171746-00021LF
SMDUSB ConnectorsAmphenolPMEG3050EP,115-JSM
SOD-128-55℃~+125℃ 1 Independent 350uA@60V 3A 60V 700mV@3A 80A SOD-128 Schottky Diodes ROHSJSMSEMISchottky Diodes
README
README.mdSynth Head
To create an open source suit which can be worn by an individual and customised to their will. It also must be constructed in such a way that an average human could build it within a reasonable budget and time. The suit must be modular whilst remaining safe for the user to operate. The software must be easy to configure for any individual and has capability to modify without the need to always reflashing its firmware. The project was created according to this standard however, it has evolved over time to be more of a testing ground for sensors and other features of the like as I will continue this along with other projects I have due to compatibility.

Overview
This project is always in the works and will be updated. Although regular updates are not possible due to me still being in uni, I will do what I can. This repo is basically a better version of the other repo and a true migration as the old one due to its structure. The reason for it being a new repo rather then just a fix is cause the title changed so the old link wouldn't have worked anyway. The current design is DX which stands for Design 10 as it is the 10th time the base shape has changed, the .3 at the end is an iterator for which version were on.
Features
- Vacuum Formed Visor allows the user to see out of a clear shell rather then the previous mesh version which caused chromatic abberation, preventing the true colours of the display from emiting through the visor properly.
- Detachable Substructure which conformes to the visor ridge provides an easy to modify platform to which different displays, sensors and other modules.
- Builtin Head Restraint was designed to hold in an average head with relatively high pressure, although the pressure seems like it cause pain, the addition of a foam pad mitigates this and is actually comfortable to wear.
- Silent Slim Jaw Mount of around 6mm in total thickness is directly integrated to the shell.
- Snoot Sensors All of the sensors and modules are attached directly into the detachable substructure and can easily be replaced and upgraded as needed, many of which includes: Boop detection, snoot holding detection & IMUs.
- Ventillation is key to an alive and well user, there are 2 fans located below the tongue which negatively ventillates the user.
In the works
- The visor edge and mating surface will be changed due to it currently resulting in an uneven edge to edge connection.
- The builtin head restraint will also be upgraded, although the system works it is not the best designed as it is currently difficult to put the pins in place.
- Electronics & other cabling will be hidden in the final release as it is not compact due to the Rushed version built for speed and prototyping rather then stability.
- ARCOS migration is still under play, the entire library is basically being rewritten slowly so it runs faster with more features. The library is currently not accessable as it is privated but it will be released with the release of the synth head 10.3.
- Feature Inclusion: Cable management
- Feature Inclusion: Visor Edge Alignment Upgrade
- Feature Inclusion: Ventillation Upgrade
- Feature Inclusion: Jaw Mount Upgrade (Attached to head restraint)
- Feature Inclusion: Lighter Frame
- Feature Inclusion: Custom PCB (Control Board, Power & Sensors)
Roadmap
- Milestone: Synth Head DX
- Milestone: Synth Head DX.1
- Milestone: Synth Head DX.2 Rushed
- Milestone: Synth Head DX.3 Rushed
- Milestone: Properly Structured Github
Licensing
- GNU-GPL-3.0: All Software
- CC-NONCOMM: All Hardware (Circuits, CAD, etc)
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R9, R10, R11, R12 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C12 |
| 2 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C9 |
| 2 | 10uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C11 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 74HC245D_653 | 74HC245:SOIC127P1032X265-20N | U2, U3 |
| 2 | LED | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 10171746-00021LF | USBC:MOLEX_2171790001 | J1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 147ohm | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R7 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 33ohm | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R8 |
| 1 | Boot | Buttons:SW_B3U-1000P | S1 |
| 1 | Display Power | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J3 |
| 1 | ESP32-S3-WROOM-1U | RF_Module:ESP32-S3-WROOM-1U | ESP1 |
| 1 | Expansion Data | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | Expansion PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | HUB75 Left | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J4 |
| 1 | HUB75 Right | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | LD1117S50TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | LOGO | LOGO | G*** |
| 1 | MicroSD | Micro SD:MicroSD_473092651 | J13 |
| 1 | PMEG3050EP_115 | PMEG Diode:DIO_PMEG3050EP_115 | D3 |
| 1 | RST | Buttons:SW_B3U-1000P | S2 |
| 1 | Substructure | FCC:FFC-4-0.5 | U5 |
| 1 | Substructure Power | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J11 |
More from Cyberspecies/Synth-Head
12- 4 layers60 × 89.5 mm

- 4 layers100 × 100 mm
.kicad_pcb.jpg?size=s&soon)
- 2 layers92 × 82.5 mm
/Old%201/Combined_Fabrication.kicad_pcb.jpg?size=s&soon)
- 4 layers55 × 20 mm

- 4 layers50 × 47.5 mm

- 2 layers100 × 100 mm
.kicad_pcb.jpg?size=s&soon)
- 2 layers60 × 35 mm
/Old%200/Synth%20Head%20CPU/Synth%20Head%20CPU.kicad_pcb.jpg?size=s&soon)
- 2 layers60 × 30.4 mm
/Old%200/Synth%20Head%20GPU/Synth%20Head%20GPU.kicad_pcb.jpg?size=s&soon)
- 4 layers40 × 35.5 mm

- 2 layers98.5 × 98.4 mm

- 2 layers30 × 40 mm

- 4 layers50 × 35 mm

Similar boards
- 2 layers53.8 × 66 mm

FCD-0022
RWeick/GBA-Codebreaker-and-Xploder-SP-FCD-0022
The full schematic, PCB, and flash dump of the GBA Codebreaker and Xploder SP.
33 parts6GPL-3.0 - 4 layers112.3 × 73.8 mm

IndMotorControl
ivanchairez01/indMotorControl
STM32-based industrial motor controller featuring FreeRTOS, CAN networking, closed-loop PID speed control, fault management, and real-time diagnostics.
54 parts - 8 layers118 × 100 mm

Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 10 layers120 × 120 mm

K410t devboard
antmicro/kintex-410t-devboard
This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.
1,020 parts46Apache-2.0 - 6 layers68.9 × 47.5 mm

Mowi
septentrio-gnss/mowi
Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module
283 parts35 - 4 layers33 × 90 mm

Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT - 4 layers115 × 55 mm

Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 4 layers58 × 75 mm

TS VDAC A4
andrewinsidelazarev/VDAC4
Графический сопроцессор + HDMI конвертер для ZX Evolution / TS-Config + сетевая карта + звуковой модуль
61 parts2MIT
Questions
How big is the Substructure GPU PCB?
It measures 60 × 35 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Substructure GPU use?
44 parts, built around the ESP32-S3-WROOM-1U-N4, 74HC245D653, 10171746-00021LF and PMEG3050EP,115-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Substructure GPU KiCad files?
From the Cyberspecies/Synth-Head repository on GitHub, at the commit this page was made from: the board is Embedded/Recondensed/Substructure GPU/Substructure GPU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Substructure GPU design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cyberspecies before reusing the design.