2 layers27.3 × 19.7 mm
RCswitch2
CyberNet-Git/electronics4rc
Automatically exported from code.google.com/p/electronics4rc
10 parts
2 layers42.5 × 29.2 mm
Automatically exported from code.google.com/p/electronics4rc
- Size
- 42.5 × 29.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 24
- Pads
- 75
- Tracks, vias
- 174, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Mar 2015
- Updated
- 1 Jun 2025
Overview
Bano is an open-source printed circuit board by CyberNet-Git, from the CyberNet-Git/electronics4rc repository on GitHub. It is a 2-layer board of 42.5 × 29.2 mm with 26 parts on 24 nets, routed with 174 tracks and 5 vias.
It is built around the ATTINY13A-SSU, BC817 and SS12. Its parts include 6 resistors, 4 ICs, 3 diodes, 3 transistors and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY13A-SSU
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
SS12
SMA(DO-214AC)Schottky Diodeshongjiacheng
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0,33 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 47uh | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07M | L1, L2, L3 |
| 3 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SS12 | Diode_SMD:D_SOD-523 | D1, D2, D3 |
| 3 | ZXLD1350 | Package_TO_SOT_SMD:TSOT-23-5 | U2, U3, U4 |
| 1 | 3S LiPO | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | - PWR + |
| 1 | 4.7uF | Capacitor_SMD:C_Elec_4x5.4 | C1 |
| 1 | ATtiny13A-SSU | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LED1 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | LED2 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | LED3 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | PPM | Connector_Wire:SolderWirePad_1x03_P3.175mm_Drill1mm | Receiver |
| 1 | PROGRAM | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | AVR ISP |
Questions
How big is the Bano PCB?
It measures 42.5 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bano use?
26 parts, built around the ATTINY13A-SSU, BC817 and SS12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bano KiCad files?
From the CyberNet-Git/electronics4rc repository on GitHub, at the commit this page was made from: the board is BanoMy/Bano/Bano.kicad_pcb and its schematic RC-switch-2/RCswitch2/RCswitch2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bano design in my own project?
Its repository states no licence, so its author keeps all rights: ask CyberNet-Git before reusing the design.
More from CyberNet-Git/electronics4rc
1Similar boards
- 2 layers60 × 18 mm
- 2 layers47.7 × 45.5 mm
- 4 layers88 × 72 mm
- 2 layers117.1 × 86 mm
- 2 layers72.3 × 87.3 mm
- 2 layers33 × 30 mm
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT - 2 layers200 × 100 mm
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0 - 2 layers
TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9