

TypeC2DoubleVoltage
- Size
- 55.9 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 26
- Pads
- 138
- Tracks, vias
- 54, 120
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Feb 2024
- Updated
- 20 Mar 2024
Overview
TypeC2DoubleVoltage is an open-source printed circuit board by CyberMomomo, from the CyberMomomo/TypeC2DoubleVoltage repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.9 × 25.4 mm with 55 parts on 26 nets, routed with 54 tracks and 120 vias.
It is built around the MC34063AD. Its parts include 20 capacitors, 14 resistors, 8 inductors, 4 ICs and 3 diodes.
Main components
1README
README.mdTypeC2DoubleVoltage
Introduction
This device is used for converting voltage from 5V input by USB Type-C Plug to any positive and negetive voltages from 1.25V to 30V.
How to use
Use the gerber files and bom from releases you could get a demo board which can produce +12V 40mA and -12V 40mA output. By changing R7, R8, R11, R14 you could get any other voltages you want. But you should use proper capacitors when you use the device to get other voltages in order to avoid the overvoltage. And any sigle volatge output should not load over 500mW or the output ripple will surge and the MC34063 may overheat.
Performance
For the demo board, the output ripple is lower than 1mVpp in unloaded test, and it is lower than 2mVpp when loading a 40mA output.
Images
![]()
![]()
![]()
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 105 0603 25V X5R | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C9, C12, C16 |
| 6 | 106 0805 25V X5R | Capacitor_SMD:C_0805_2012Metric | C2, C6, C7, C13, C14, C17 |
| 6 | 5.1k 0603 | Resistor_SMD:R_0603_1608Metric | R1, R2, R6, R9, R12, R13 |
| 4 | 100uH 3015 | Inductor_SMD:L_Changjiang_FNR3015S | L3, L4, L7, L8 |
| 4 | 47uF 16V D5xL5 | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C8, C11, C19, C22 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 10uF 16V D4xL5 | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C10, C21 |
| 2 | 200mR 1206 | Resistor_SMD:R_1206_3216Metric | R4, R10 |
| 2 | 22uH 3015 | Inductor_SMD:L_Changjiang_FNR3015S | L1, L5 |
| 2 | 331 0603 50V X7R | Capacitor_SMD:C_0603_1608Metric | C4, C15 |
| 2 | 47uH 4030 | Inductor_SMD:L_Changjiang_FNR4030S | L2, L6 |
| 2 | 499R 0603 | Resistor_SMD:R_0603_1608Metric | R7, R11 |
| 2 | 604R 0603 | Resistor_SMD:R_0603_1608Metric | R8, R14 |
| 2 | K24-MS | Diode_SMD:D_SOD-123F | D3, D4 |
| 2 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 1 | 180R 0603 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1k 0603 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | LED 0603 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LM317_SOT-223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LM337_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Customer_Connector:USB_C_Receptacle_6P_01 | J1 |
Similar boards
- 2 layers51.5 × 89 mm

- 2 layers70 × 36 mm

Air Purifier Uppatvind
horvathgergo/esp8266-for-uppatvind
Smart controller for IKEA Uppåtvind Air Purifiers
27 parts60GPL-3.0 - 2 layers98 × 40 mm

Air Purifier Fornuftig Switch
horvathgergo/esp8266-for-fornuftig
Smart controller for IKEA Förnuftig Air Purifiers
23 parts31GPL-3.0 - 2 layers116.6 × 93.3 mm

- 2 layers73.9 × 46 mm

- 4 layers282.8 × 122.9 mm

- 2 layers50.8 × 68.6 mm

MCU Board
caipiblack/STM32-CAN-Bus-board
This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus
26 parts5GPL-3.0 - 2 layers52.2 × 79 mm

Programmable light
dilshan/programmable-light
Simple time based programmable light controller
55 parts5MIT
Questions
How big is the TypeC2DoubleVoltage PCB?
It measures 55.9 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TypeC2DoubleVoltage use?
55 parts, built around the MC34063AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TypeC2DoubleVoltage KiCad files?
From the CyberMomomo/TypeC2DoubleVoltage repository on GitHub, at the commit this page was made from: the board is TypeC2DoubleVoltage.kicad_pcb and its schematic TypeC2DoubleVoltage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TypeC2DoubleVoltage design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
