4 layers100 × 68 mm
2 layers64.9 × 38.9 mm
STM32NGFF
cyberknet/STM32NGFF2STM32 breakout board using NGFF card edge connector
- Size
- 64.9 × 38.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 84
- Pads
- 245
- Tracks, vias
- 551, 87
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Nov 2020
- Updated
- 22 Nov 2020
Overview
STM32NGFF is an open-source printed circuit board by cyberknet, from the cyberknet/STM32NGFF repository on GitHub. It is a 2-layer board of 64.9 × 38.9 mm with 41 parts on 84 nets, routed with 551 tracks and 87 vias.
It is built around the 74LVC1G17Z, MIC5205-3.3YM5 and USBLC6-2SC6, with the S4B-PH-K-S(LF)(SN) and TS-1145A-C-B among its other parts. Its parts include 14 capacitors, 8 resistors, 4 ICs, 4 connectors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
5
74LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
MIC5205-3.3YM5
SOT-23-5-40℃~+85℃@(Ta) 1 150mA 200mV@(50mA) 20V 2uA 3.3V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
S4B-PH-K-S(LF)(SN)
弯插,P=2mm-25℃~+85℃ 1 100V 1x4P 2A 2mm 4 4.8mm 4P 7.6mm 9.9mm Brass K Pin PA66 PH Right Angle Tin UL94V-0 White 弯插,P=2mm Wire To Board Connector ROHSJSTWire To Board Connector
TS-1145A-C-B
SMD-4P,4.2x3.2mm-30℃~+85℃ 100,000 cycles 12V 2.5mm 2.6N 3.2mm 4.2mm 50mA No Oval Button SPST Surface Mount,Vertical White Without Bracket SMD-4P,4.2x3.2mm Tactile Switches ROHSXKB ConnectionTactile Switches
README
README.mdSTM32NGFF
About
STM32 breakout board using NGFF card edge connector
For licensing information please see our LICENSE file
Created by the members of 33C (fka reindeer pig baboon with mouse accessory)
Schematic
PCB
PCB 3D View
Front:
Back:
Traces
Contact
Join us on Discord at https://discord.gg/E6ujkUG
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C8, C9, C10 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C12 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1M | Capacitor_SMD:C_0603_1608Metric | R5, R8 |
| 2 | 1k | Capacitor_SMD:C_0603_1608Metric | R1, R3 |
| 2 | 5.11k | Capacitor_SMD:C_0603_1608Metric | R6, R7 |
| 2 | S4B-PH-K-S(LF)(SN) | JST:S4B-PH-K-S_LF_SN | J2, J4 |
| 1 | 10k | Capacitor_SMD:C_0603_1608Metric | R2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 39n | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 470 | Capacitor_SMD:C_0603_1608Metric | R4 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric_Castellated | F1 |
| 1 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | GREEN | LED_SMD:LED_0201_0603Metric_Castellated | D2 |
| 1 | HRO_TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | J3 |
| 1 | MIC5205-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | NASMO-S6701-TP40 | Argosy Research:NASMO-S6701-TP40 | J1 |
| 1 | RED | LED_SMD:LED_0201_0603Metric_Castellated | D1 |
| 1 | STM32F303RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | TS-1145A-C-B | Button_Switch_SMD:SW_SPST_PTS810 | PSW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | ~ | Fuse:Fuse_0805_2012Metric | FB1 |
The 37 most common of 41 parts.
Similar boards
- 2 layers90 × 70 mm
Midi s3 mini
usr-ein/TriMixxx
Open source standalone DJ multimedia player, compatible with Rekordbox
102 parts44GPL-3.0 - 2 layers110 × 80 mm
- 4 layers85 × 85 mm
- 4 layers103 × 82.4 mm
- 4 layers58 × 38 mm
- 2 layers115 × 80 mm
Nixie Clock
PennyLekas/Nixie-Clock
v1 is broken and required some bodge wires to work. I have not updated the schematic and PCB to correct my mistakes. It also has some deficencies in the dimming circuit resulint in a quiet, but audible whine.
102 parts - 2 layers49.6 × 43.6 mm
A1-Toolhead Board
DevCyclonekitten/Bambu-A1-Klipper
A repository about the development of modifying a bambu labs a1 printer to run on klipper
74 parts4GPL-3.0
Questions
How big is the STM32NGFF PCB?
It measures 64.9 × 38.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32NGFF use?
41 parts, built around the 74LVC1G17Z, MIC5205-3.3YM5, USBLC6-2SC6 and S4B-PH-K-S(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32NGFF KiCad files?
From the cyberknet/STM32NGFF repository on GitHub, at the commit this page was made from: the board is STM32NGFF.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32NGFF design in my own project?
Its repository states no licence, so its author keeps all rights: ask cyberknet before reusing the design.