
Karnix ASB
Fabmicro-LLC/Karnix_ASB-254
Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254

a PCB that turns the Colorlight 5A-75B into an easy to use development platform for cheap
Chubby hat is an open-source printed circuit board by cyber-murmel, from the cyber-murmel/chubby-hat-hardware repository on GitHub. It is a 2-layer board of 143.5 × 91.4 mm with 84 parts on 204 nets, routed with 683 tracks and 54 vias.
It is built around the AMS1117-3.3, FT2232D and USBLC6-2SC6, with the AO3401A among its other parts. Its parts include 24 capacitors, 21 connectors, 17 resistors, 4 ICs and 2 switches. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0603_1608Metric_Icon | C1, C2, C3, C4, C6, C9, C10, C11, C12, C13, C14, C19, C20, C22, C23, C24 |
| 8 | HUB75 | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 7 | Pmod_02x06_Host | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Horizontal | Pmod1, Pmod2, Pmod3, Pmod4, Pmod5, Pmod6, Pmod7 |
| 5 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J15, J16, J17, J18, J19 |
| 4 | 1.5k | Resistor_SMD:R_0603_1608Metric_Icon | R12, R16, R19, R20 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Icon | C5, C7, C8, C21 |
| 4 | 36p | Capacitor_SMD:C_0603_1608Metric_Icon | C15, C16, C17, C18 |
| 4 | M4 | MountingHole:MountingHole_4.3mm_M4_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Icon | R13, R15, R17 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric_Icon | R3, R8, R9 |
| 2 | 20 | Resistor_SMD:R_0603_1608Metric_Icon | R6, R7 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Icon | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Icon | R10, R11 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Icon | R18 |
| 1 | 600Ω@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 6MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J13 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J20 |
| 1 | FT2232D | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J14 |
| 1 | Screw_Terminal_01x02 | Connector_Wire:SolderWirePad_1x02_P7.62mm_Drill2mm | J9 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J21 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J12 |
| 1 | boot0 | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | pink | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | reset | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |

Fabmicro-LLC/Karnix_ASB-254
Karnaugh Interactive Extendable ASIC Simulation Board AKA Karnix ASB-254

mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)


aleko-khomasuridze/AuroraF4
AuroraF4 is a high-performance development board based on the STM32F407VGT6 microcontroller, featuring peripherals like I2C, SPI, UART, and GPIO for versatile applications.

alihaanc/SKYKILLER-Development-Board
Drone and Rocket Development PCB board

supsenpaii/iot-classroom
Website lớp học tương tác: React, Express, SQLite và giao thức WebSocket kết nối ESP32. Chưa kèm firmware.

Kilan777/HomeDeck
Jarvis HomeDeck: a Raspberry Pi CM4 carrier board and voice-assistant software for a 7-inch smart display (KiCad hardware, generated from Python, plus the Python/JS assistant)

It measures 143.5 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
84 parts, built around the AMS1117-3.3, FT2232D, USBLC6-2SC6 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cyber-murmel/chubby-hat-hardware repository on GitHub, at the commit this page was made from: the board is source/chubby hat.kicad_pcb and its schematic source/chubby hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cyber-murmel before reusing the design.