2 layers48 × 44 mm
Spacing drc
ihsinoky/he-piantor-42
42-key Hall-effect keyboard targeting a unified reverse-V assembly. D-015 defines reusable Main + Left/Right Wings; future Wing geometry must be project-owned or explicitly approved.
49 parts
2 layers21 × 51 mm
Cybdopico
Cybdo/cybdopicorp2040 devboard using pico footprint with some extra features like usbc, usb protection, and a touch button! inspired by orpheuspico
- Size
- 21 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 57
- Pads
- 245
- Tracks, vias
- 527, 79
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Dec 2025
- Updated
- 23 Apr 2026
Overview
Cybdopico is an open-source printed circuit board by Cybdo, from the Cybdo/cybdopico repository on GitHub, published under the MIT licence. It is a 2-layer board of 21 × 51 mm with 35 parts on 57 nets, routed with 527 tracks and 79 vias.
It is built around the RP2040, W25Q16JVUXIQ and USBLC6-2SC6, with the 1N5819WS and ABM8-272-T3 among its other parts. Its parts include 15 capacitors, 9 resistors, 4 ICs, 3 switches and 1 diode. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
5
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASH
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdCybdo Pico!
RP 2040 based devboard, inspired by the Raspberry Pi Pico and the Orpheus Pico
Key Features
- RP2040 microcontroller with 16Mibit (2MB) flash
- Raspberry Pi Pico form factor compatiable
- USB-C connectivity
- Dedicated Reset switch
- PCB Touch button (GPIO24)
- All 0603 components where applicable for easier hand soldering
- Pin labels on both sides
- Exposed GPIO29 pin
- Hack Club art :)
Schematics
Board
JLC order
Firmware
Compatiable with most Pi Pico firmwares, including MicroPython and CircuitPython
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9, C10, C11, C12, C14, C15 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 1kR | Resistor_SMD:R_0603_1608Metric | R8, R14 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C13 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 5k1R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | 10kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1MR | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | HC FLAG | Library:hackclub flag touch | SW3 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | RESET | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Plug_USB2.0 | imports:TYPE-C-31-M-12 | P1 |
| 1 | W25Q16JVUXIQ | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
Questions
How big is the Cybdopico PCB?
It measures 21 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cybdopico use?
35 parts, built around the RP2040, W25Q16JVUXIQ, USBLC6-2SC6 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cybdopico KiCad files?
From the Cybdo/cybdopico repository on GitHub, at the commit this page was made from: the board is cybdopico/cybdopico.kicad_pcb and its schematic cybdopico/cybdopico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cybdopico design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 28.5 mm
Controller
PanosEconomou/open-keyboard
A 100% from scratch open source super cool awesome keyboard that will take years to make if ever
39 parts - 2 layers21 × 51 mm
Orphkicad
adammakesthingsdev/Orpheus-Pico-Kicad
Kicad files and JLCPCB production gerbers for Orpheus Pico
43 parts13 - 2 layers358.8 × 134.9 mm
Rheneium
Enderman8843/Rhenium
Rhenium is a Keyboard that is powered by RP2040 microprocessor that uses a USB-C,
213 parts1 - 2 layers16 × 45 mm
- 2 layers21 × 51 mm
- 2 layers21.3 × 51.3 mm
Picov
vibsthebot/picov
A RP2040 powered Pico formfactor devboard using usb-c. It includes a 4x4 2020 neopixel array. The pcb was designed in KiCad.
50 parts1 - 2 layers69.1 × 53.8 mm
CybdoDuino
Cybdo/CybdoDuino
I have so many old Arduino-based projects, including a CNC plotter I made with old CD drives (see here), that could do with a refresh.
71 parts2MIT