
Orphkicad
adammakesthingsdev/Orpheus-Pico-Kicad
Kicad files and JLCPCB production gerbers for Orpheus Pico

Rhenium is a Keyboard that is powered by RP2040 microprocessor that uses a USB-C,
Rheneium is an open-source printed circuit board by Enderman8843, from the Enderman8843/Rhenium repository on GitHub. It is a 2-layer board of 358.8 × 134.9 mm with 213 parts on 146 nets, routed with 1,389 tracks and 93 vias.
It is built around the RP2040, ME2135A33M6G and W25Q16JVUXIQ, with the USBLC6-2SC6, 1N5819WS and X322512MSB4SI among its other parts. Its parts include 86 diodes, 85 switches, 16 capacitors, 9 resistors and 4 ICs. It belongs with the RP2040 boards of this library.
It is a Keyboard that is powered by RP2040 microprocessor that uses a USB-C, this keyboard is using akko v3 pro black switches also this has a layout of a slight variation of ANSI-104
*ALWAYS USE THIS
*Bit Glitchy
Personally I had never used a mechanical keyboard in my life and only relied on cheap membrane keyboard or use my laptop's keyboard , But when I heard about Blueprint I decided to change it all at once and build myself a Mechanical keyboard , And also decided that I need to have everything custom nothing extrenal thus I embeded the microprocessor into the pcb making it better!
Rhenium was named after the inspiration taken from the chromium browser!
To use this computer appartus I would suggest using your biological input device so called digits i.e. fingers ,Begin by selecting finger of your choice then elevate your finger about 0.3-0.4 cm above the desired key then place it in on that particular key then gently apply 0.30N of magnitude of force this would lead your visual display unit to render the desired character represented by the key , Simple as that
Before that make sure the assemeble the keyboard and connect it via the usb-c , and to flash the firmware use the bootsel btn and read the above for both KMK and QMK
| Top & Side View | Rear view |
|---|---|
| Full Assembly View |
|---|
| PCB | Schematics /Wiring |
|---|---|
| 3D view | |
| ------------------- | |
See I did not find gdsr option so I chose UPS world wide express shipment
| Qty | Value | Footprint | References |
|---|---|---|---|
| 82 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +66 |
| 65 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +49 |
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C8, C13, C14 |
| 7 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW64, SW67, SW77, SW79, SW80, SW82, SW83 |
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R10 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7, C11 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW27, SW39 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D85 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW87 |
| 1 | BT_RST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW85 |
| 1 | BT_USR | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW86 |
| 1 | Conn_01x04_Pin | OLED:SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 1 | ESC | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP2 |
| 1 | LED_COND | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D87 |
| 1 | LED_PWR | LED_SMD:LED_0603_1608Metric | D86 |
| 1 | LED_USR | LED_SMD:LED_0603_1608Metric | D88 |
| 1 | ME2135A33M6G | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW84 |
| 1 | SW_PUSH | Button_Switch_Keyboard:SW_Cherry_MX_2.25u_PCB | SW52 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.75u_PCB | SW40 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB | SW26 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_2.75u_PCB | SW65 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_2.25u_PCB | SW53 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_6.25u_PCB | SW81 |
| 1 | TYPE-C 16PIN 2MD(073) | LCS:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | W25Q16JVUXIQ | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U2 |
| 1 | X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |

adammakesthingsdev/Orpheus-Pico-Kicad
Kicad files and JLCPCB production gerbers for Orpheus Pico


Enderman8843/illuminati
illuminati is a precession drafting triangle with many inbuilt microprocessor and wifi


Cybdo/cybdopico
rp2040 devboard using pico footprint with some extra features like usbc, usb protection, and a touch button! inspired by orpheuspico


16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

It measures 358.8 × 134.9 mm and has 2 copper layers, 1.6 mm thick.
213 parts, built around the RP2040, ME2135A33M6G, W25Q16JVUXIQ and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Enderman8843/Rhenium repository on GitHub, at the commit this page was made from: the board is PCB/Rheneium.kicad_pcb and its schematic PCB/Rheneium.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Enderman8843 before reusing the design.