Skip to the content
2 layers15.2 × 27.9 mmTiny ch32, the printed circuit board in 3D

Welp, what else than a tiny c32 devboard? A tiny ch32 device on your fingertips

Size
15.2 × 27.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
27
Pads
159
Tracks, vias
163, 31
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Jun 2026
Updated
9 Jul 2026

Overview

Tiny ch32 is an open-source printed circuit board by cyao1234, from the cyao1234/ch32t repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 15.2 × 27.9 mm with 26 parts on 27 nets, routed with 163 tracks and 31 vias.

Its parts include 5 resistors, 3 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the RISC-V boards of this library.

README

README.md

C32 Devboard

Welp, what else than a tiny c32 devboard? A tiny ch32 device on your fingertips

Features:

  • 2 leds
  • Low cost
  • tiny form
  • Nothing much
  • USB bootloader via rv003usb
  • OPAMPs
  • 12 bit ADCs

Everything is also open source, you can see it all in this repo.

The PCB uses a dual layer board in order to save costs, but still maintains a solid ground plane on the back side. It also has an embedded 3v3 ldo.

ThingCost
PCB + PCBA$115

Parts

26
QtyValueFootprintReferences
8LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***
31.5kResistor_SMD:R_0402_1005MetricR1, R2, R5
21uFCapacitor_SMD:C_0402_1005MetricC17, C18
25.1kResistor_SMD:R_0402_1005MetricR3, R4
2Conn_01x10PCM_ckl-castellated-2.54mm:Castellated_1x10_P2.54mm_VerticalJ2, J3
2CutPCM_ckl-misc:SolderJumper-2_Bridged_Pad_SmallJP1, JP2
2LEDInductor_SMD:L_0402_1005MetricD1, D2
1100nFCapacitor_SMD:C_0402_1005MetricC1
1CH32V003FxUxPackage_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalViasU1
1USB_C_Receptacle_USB2.0_14PPCM_ckl-connector:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1XC6206PxxxMRPackage_TO_SOT_SMD:SOT-23-3U2

The 25 most common of 26 parts.

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Tiny ch32 PCB?

It measures 15.2 × 27.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tiny ch32 use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tiny ch32 KiCad files?

From the cyao1234/ch32t repository on GitHub, at the commit this page was made from: the board is hardware/tiny-ch32.kicad_pcb and its schematic hardware/tiny-ch32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tiny ch32 design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).