
Re innovation minipredictionmachine minipredictionmachine wifi unit
oomlout/oomlout_oomp_project_bot_v_2

An ESP8266 breakout board with Display and WS2812 LEDs
CheeseBoardCheddar is an open-source printed circuit board by curiouselectric, from the curiouselectric/CheeseBoardCheddar_Hardware repository on GitHub. It is a 2-layer board of 50 × 100 mm with 32 parts on 42 nets, routed with 404 tracks and 5 vias.
It is built around the 74LVC1G17Z and NODEMCU(12F). Its parts include 12 connectors, 8 diodes, 5 capacitors, 2 ICs and 1 resistor. It belongs with the lEDs and displays and interfaces and adapters boards and the ESP8266 boards of this library.
This is an ESP8266 breakout board with small display, user inputs and WS2812 LEDs.
This is designed as a low cost platform to quickly get started with projects with the ESP8266. We wanted to design something that got you up and running with your project idea quickly and easily.
The main processor is based upon the ESP8266 system-on-chip from Espressif Systems.
This can be programmed via the Arduino IDE (or your favourite IDE).
This repository contains the design files, software and hardward files for this project.
We can supply this project in kit form from The Curious Electric Company and Tindie.
This repository is for the hardware and instructions only. The software is available here:
https://github.com/curiouselectric/CheeseBoard_Software
The instructions are available in this folder as a .pdf
It is based upon the NodeMCU Amica ESP8266 module which is low-cost, easy to find and has all regulation and protection required.
There is a small I2C interfaced OLED screen on the unit for displaying data and options.
A rotary encoder is used to select various options and as the user interface.
There are five WS2812 LEDs which can be controlled via the ESP8266, along with a level shifter for good 5V operation.
A connection output is provided for HC12 wireless modules and access to a software serial output is provided through screw terminal pads.
This can be powered via USB-B or Micro-USB connector.
A screw-temrinal connector for 5V power is also supplied, if needed.
PCB design has been produced using KiCAD.
Hardware for the enclosure is also provided here.
| Node MCU Conenction | Pin Number | Function | Arduino Alias |
|---|---|---|---|
| D0 | 30 | HC-12 SET pin | 16 |
| D1 | 29 | Soft Serial Tx | 5 |
| D2 | 28 | Soft Serial Rx | 4 |
| D3 | 27 | LED WS2812 | 0 |
| D4 | 26 | I2C SCLK | 2 |
| D5 | 23 | I2C SDA | 14 |
| D6 | 22 | Enocder B | 12 |
| D7 | 21 | Enocder A | 13 |
| D8 | 20 | Encoder Switch | 15 |
| D9 | 19 | H/W Serial Rx | 3 |
| D10 | 18 | H/W Serial Tx | 1 |
| A0 | 1 | N/C | A0 |
This project has been designed with some interesting software to get you up and running. We wanted this project to do something useful or fun straight away. But it has been designed for hacking and for you to change, alter, adjust and play as you need.
This kit comes with a simple enclosure to house the electronics.
This has been designed to be laser cut in 3mm acrylic. The design files are within this repository, if you would like to make your own or alter the design at all.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | matts_components:C1_wide_lg_pad | C1, C2, C3, C4, C5 |
| 5 | WS2812B_SMD | REInnovationFootprint:SM_WS2812B | D3, D4, D5, D6, D7 |
| 2 | 1N5819 | REInnovationFootprint:TH_Diode_1 | D1, D2 |
| 1 | 330 | REInnovationFootprint:TH_Resistor_1 | R1 |
| 1 | 500mA | REInnovationFootprint:TH_MC36188_FUSE | F1 |
| 1 | 5V_EXT | matts_components:SIL-2_screw_terminal | P2 |
| 1 | 74LVC1G17 | REInnovationFootprint:SM_SOT-23-5 | U2 |
| 1 | Encoder | TH_Encoder | ENC1 |
| 1 | I2C_EXT | matts_components:SIL-5_large_pads_marker | P14 |
| 1 | LED | REInnovationFootprint:TH_LED-5MM_larg_pad | D8 |
| 1 | LOGO1 | CuriousElectric3:CEC_Globe_10mm_FCU | P10 |
| 1 | LOGO2 | CuriousElectric3:TCEC_Words_13mm | P11 |
| 1 | LOGO_CHEESE | CuriousElectric3:CheeseWedge8mm | P13 |
| 1 | LOGO_MOUSE | CuriousElectric3:mouse10x10 | P8 |
| 1 | NODEMCU | REInnovationFootprint:NodeMCU_Amica_R2_FSILK | U1 |
| 1 | NODEMCU_1 | REInnovationFootprint:TH_SIL-15 | P5 |
| 1 | NODEMCU_2 | REInnovationFootprint:TH_SIL-15 | P6 |
| 1 | OLED_I2C | REInnovationFootprint:TH_OLED1306 | DISP1 |
| 1 | ON/OFF | REInnovationFootprint:SW_SPDT_R_Angle_ALIEX | SW1 |
| 1 | PCB | REInnovationFootprint:PCB_50x100mm_RJWIFI | P7 |
| 1 | SERIAL_HC12 | REInnovationFootprint:TH_SIL_5_HC12 | P3 |
| 1 | S_SERIAL | matts_components:SIL-4_screw_terminals | P4 |
| 1 | USB_Micro | REInnovationFootprint:USB_Micro-B_MOLEX_47642-0001 | P1 |

oomlout/oomlout_oomp_project_bot_v_2

wvianna/pcb-moduloDidatico-SCADA-IoT
Projeto de uma PCB para utilização de protocolos: Modbus RTU, Modbus TCP, MQTT, OPC UA pub/sub. Finalidade didática. O firmware também está implementado.


nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier

Bouni/BSH-Board
A board that interfaces the DBUS of several home appliances and brings them into Home-Assitant via ESPHome

jbilander/SDBox-v2
SDBox-v2 for Amiga, compatible with the new updated card-detect firmware


ergomechstore/rp2040-bento
The RP2040-bento is a breakout board for the RP2040 MCU.
It measures 50 × 100 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the 74LVC1G17Z and NODEMCU(12F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the curiouselectric/CheeseBoardCheddar_Hardware repository on GitHub, at the commit this page was made from: the board is CheeseBoardCheddar_PCB/CheeseBoardCheddar.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask curiouselectric before reusing the design.