Skip to the content
2 layers159.1 × 145.6 mm52Te Rev, the printed circuit board in 3D

52-key split keyboard

Size
159.1 × 145.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
65
Nets
49
Pads
512
Tracks, vias
1,007, 85
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Dec 2018
Updated
23 Jun 2019

Overview

52Te Rev is an open-source printed circuit board by culturalsnow, from the culturalsnow/52Te repository on GitHub. It is a 2-layer board of 159.1 × 145.6 mm with 65 parts on 49 nets, routed with 1,007 tracks and 85 vias.

Its parts include 27 switches, 26 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

readme.md

52Te

52Te Left Hand with SA Pulse

52Te is a split keyboard inspired by the NISSE keyboard created by Esrille.

https://www.esrille.com/keyboard/

The firmware is heavily based on Lily58 due to wiring and layout similarities.

https://github.com/kata0510/Lily58

Right now this is hand-wired with ProMicroSocket and BitBoard by swanmatch.

https://github.com/swanmatch/MxLEDBitPCB

May add a PCB for v2.0.

Parts

65
QtyValueFootprintReferences
26DIODEkbd:D3_TH_SMDD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +10
26SW_PUSHkbd:CherryMX_HotswapSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +10
6Val**kbd:HOLERef**, Ref**, Ref**, Ref**, Ref**, Ref**
1LOGOemptystring:52TeLogoG***
1LOGOemptystring:emptystringLogoG***
1MJ-4PP-9kbd:MJ-4PP-9J1
1ProMicrokbd:ProMicro_v2U1
1SW_PUSHkbd:ResetSWSW27

The 63 most common of 65 parts.

Similar boards

  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers198.1 × 30.5 mmSplitflap driver, the printed circuit board in 3D

    Splitflap driver

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    65 parts744MIT
  • 2 layers74.8 × 32.5 mmMooltipass mini, the printed circuit board in 3D

    Mooltipass mini

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    65 parts531
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers40 × 120 mmPhotodiode board v3, the printed circuit board in 3D

    Photodiode board v3

    0x23/nmWave-Interferometer

    An Open Source Interferometer for Accurate Distance Measurements

    65 parts151MIT
  • 2 layers78 × 130 mmLofence, the printed circuit board in 3D

    Lofence

    kiu/lofence

    LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

    65 parts142MIT

Questions

How big is the 52Te Rev PCB?

It measures 159.1 × 145.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 52Te Rev use?

65 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 52Te Rev KiCad files?

From the culturalsnow/52Te repository on GitHub, at the commit this page was made from: the board is pcb/52Te_Rev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 52Te Rev design in my own project?

Its repository states no licence, so its author keeps all rights: ask culturalsnow before reusing the design.