
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project

IR array is an open-source printed circuit board by cultsteel, from the cultsteel/PCB repository on GitHub. It is a 2-layer board of 152 × 66.5 mm with 46 parts on 27 nets, routed with 348 tracks and 8 vias.
It is built around the LM339 and IR204-A-L. Its parts include 24 resistors, 8 diodes, 8 transistors, 2 capacitors and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10, R12, R14, R16 |
| 8 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18, R19, R20, R21, R22, R23, R24 |
| 8 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7, R9, R11, R13, R15 |
| 8 | BPW40 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | IR204A | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | LM339 | Package_DIP:DIP-14_W7.62mm | U1, U2 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |

ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project



bismarx-v1/Sumec-Remote
IR remote for MiniSumo, schematic and partial code was forked from p1rse

hitendravalhe/IR_sensor_pcb_design
This repository contains the design files and documentation for an Infrared (IR) sensor PCB with an integrated LM35 temperature sensor.

PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM


It measures 152 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the LM339 and IR204-A-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cultsteel/PCB repository on GitHub, at the commit this page was made from: the board is IR_array.kicad_pcb and its schematic IR_array.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cultsteel before reusing the design.