4 layers70 × 70.5 mm
PCB FINAL UPDATED
bash227/ECG-Motor-Control-Power-Management-PCB
A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.
111 parts2MIT
2 layers50 × 36 mm
Quickshifter
CuAuPro/quickshifter2Quickshifter for motorcycle based on shift force.
- Size
- 50 × 36 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 43
- Pads
- 108
- Tracks, vias
- 114, 41
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jun 2022
- Updated
- 25 Jun 2022
Overview
Quickshifter is an open-source printed circuit board by CuAuPro, from the CuAuPro/quickshifter repository on GitHub. It is a 2-layer board of 50 × 36 mm with 28 parts on 43 nets, routed with 114 tracks and 41 vias.
It is built around the STM32F030K6T6, INA188ID and R-78E3.3-0.5, with the ISL21080CIH315Z-TK, BC847 and RT314012 among its other parts. Its parts include 11 capacitors, 5 ICs, 4 resistors, 4 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
6
STM32F030K6T6
LQFP-32(7x7)-40℃~+85℃ 12bit 2.4V~3.6V 26 32 Bit 32KB 48MHz 4KB ARM Cortex-M0 Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
INA188ID
SOIC-8-18V~-2V、2V~18V -40℃~+125℃ 0.9V/us 1 1.4mA 104dB 12nV/√Hz@1kHz 18mA 25uV 4V~36V 600kHz 80nV/℃ 850pA 850pA EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-rail output SOIC-8 Precision Op Amps ROHSTexas InstrumentsInstrumentation Amplifiers
R-78E3.3-0.5
SIP,11.5x7.6mmDC-DC Power ModulesYLPTEC
ISL21080CIH315Z-TK
SOT-23-40℃~+85℃@(Ta) 1.5V 1.5uA 2.7V~5.5V 30uVp-p 50ppm/℃ 52uVrms 7mA Fixed Series ±0.5% SOT-23 Voltage Reference ROHSRenesas ElectronicsVoltage ReferenceBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
RT314012
DIP,29x12.7mm-40℃~+85℃ 12V 16A 16A@250VAC 360Ω 400V@AC 400mW 6ms 8ms AgNi One set changeover: 1C (SPDT - changeover) DIP,29x12.7mm Power Relays ROHSTE ConnectivityPower Relays
README
README.mdQuickshifter
Quickshifter for motorcycle.
About The Project
Quickshifter for motorcycles based on measured force on gearbox. Implemented is pull-type quicksihfter but it allows, with small modifications, push-type also.
Built With
Contents
- PCB
- Firmware
Contact
Kristjan Cuznar - LinkedIn - kristjancuznar0@gmail.com
Project Link: [https://github.com/CuAuPro/quickshifter)
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C9 |
| 2 | 510 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 12V IN | SamacSys_Parts:SHDR2W80P0X350_1X2_840X920X720P | J1 |
| 1 | 35363-0560 | SamacSys_Parts:353630560 | J3 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 5.6u | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | COIL | SamacSys_Parts:SHDR2W80P0X350_1X2_840X920X720P | J4 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D4 |
| 1 | Debug Connector | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | INA188 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ISL21080CIH315Z-TK | SamacSys_Parts:SOT95P237X112-3N | IC3 |
| 1 | MCP1804x-A002xDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | R-78E3.3-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | RT314012 | SamacSys_Parts:RT314005_2 | K1 |
| 1 | STM32F030K6T6 | SamacSys_Parts:QFP80P900X900X120-32N | IC1 |
Questions
How big is the Quickshifter PCB?
It measures 50 × 36 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Quickshifter use?
28 parts, built around the STM32F030K6T6, INA188ID, R-78E3.3-0.5 and ISL21080CIH315Z-TK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quickshifter KiCad files?
From the CuAuPro/quickshifter repository on GitHub, at the commit this page was made from: the board is PCB/quickshifter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quickshifter design in my own project?
Its repository states no licence, so its author keeps all rights: ask CuAuPro before reusing the design.
Similar boards
- 6 layers164 × 234 mm
- 2 layers49.5 × 49.7 mm
AudioPowerBoard
LEAT-EDGE/ambient-pcb-audiopower
Audio capture and energy management daughterboard PCB for the Ambient project.
121 partsCERN-OHL-P-2.0 - 4 layers98.7 × 44.7 mm
NanoLogger
TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.
221 parts - 4 layers49.8 × 106.5 mm
- 2 layers100 × 100 mm
- 4 layers243.8 × 171.5 mm
- 2 layers22 × 41 mm
RSTM32F030K6T6
r-pv/STM32F030K6
Custom board for the STM32F30K6T6 MCU, compatible with STM32Duino (Arduino).
23 parts11GPL-3.0