2 layers339.1 × 143.2 mm
Adelheid
dcpedit/adelheid-plus
The Adelheid Plus is a fork of Flookay's Adelheid case and PCB.
332 parts28MIT
2 layers80 × 50 mm
Ts590 prog btn
ct7aez/TS-590-Program-Function-extention1TS-590s(G) Program Funcion (PF Keys) extention circuit and pcb as in TS-590 IDM.
- Size
- 80 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 16
- Pads
- 87
- Tracks, vias
- 164, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Apr 2015
- Updated
- 14 Jul 2015
Overview
Ts590 prog btn is an open-source printed circuit board by ct7aez, from the ct7aez/TS-590-Program-Function-extention repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 80 × 50 mm with 23 parts on 16 nets, routed with 164 tracks and 4 vias.
It is built around the PF4 and RJ45. Its parts include 8 switches, 6 resistors, 4 connectors and 2 capacitors.
Main components
2README
README.mdTS-590-Program-Function-extention
TS-590s(G) Program Funcion (PF Keys) extention circuit and pcb as in TS-590 IDM. This is a small project for implementing the TS-590 IDM manual ideia.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2 |
| 2 | 22K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3, R4 |
| 1 | 10u | Capacitors_Elko_ThroughHole:Elko_vert_11.2x6.3mm_RM2.5 | C2 |
| 1 | 15K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R5 |
| 1 | 1K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R6 |
| 1 | 1u | Capacitors_Elko_ThroughHole:Elko_vert_11.2x6.3mm_RM2.5 | C1 |
| 1 | CONN_02X04 | Pin_Headers:Pin_Header_Straight_2x04 | P1 |
| 1 | DB9 | Connect:DB9FC | J1 |
| 1 | DOWN | Discret:SW_PUSH_SMALL | SW7 |
| 1 | JACK_TRS_6PINS | TS-590-Program-Function-extention:myaudiojack | J2 |
| 1 | PF1 | Discret:SW_PUSH_SMALL | SW4 |
| 1 | PF2 | Discret:SW_PUSH_SMALL | SW2 |
| 1 | PF3 | Discret:SW_PUSH_SMALL | SW5 |
| 1 | PF4 | Discret:SW_PUSH_SMALL | SW3 |
| 1 | PTT | Discret:SW_PUSH_SMALL | SW1 |
| 1 | PTT_LOCK | Discret:SW_SPDT | SW9 |
| 1 | RJ45 | Connect:RJ45_8 | J3 |
| 1 | UP | Discret:SW_PUSH_SMALL | SW6 |
The 20 most common of 23 parts.
Questions
How big is the Ts590 prog btn PCB?
It measures 80 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ts590 prog btn use?
23 parts, built around the PF4 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ts590 prog btn KiCad files?
From the ct7aez/TS-590-Program-Function-extention repository on GitHub, at the commit this page was made from: the board is ts590_prog_btn.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ts590 prog btn design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers68.6 × 52.1 mm
Roadrunner
jakeson21/Roadrunner-TM4C123G
Arduino clone based on TI's TM4C123G, an ARM M4F running at 80 MHz.
104 parts3GPL-3.0 - 2 layers50.8 × 60 mm
Eos tm4c123-board
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
87 parts8MIT - 2 layers339.1 × 118.7 mm
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
