4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers
Faden
ct2034/ctronicsElectronics Circuits ...
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 22
- Pads
- 86
- Tracks, vias
- 152, 46
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Aug 2020
- Updated
- 2 Oct 2020
Overview
Faden is an open-source printed circuit board by ct2034, from the ct2034/ctronics repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 35 parts on 22 nets, routed with 152 tracks and 46 vias.
It is built around the TL082. Its parts include 13 resistors, 11 capacitors, 4 diodes, 2 connectors and 1 IC.
Main components
1Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R11, R12 |
| 3 | R_POT | Potentiometer_THT:Potentiometer_Vishay_T73XW_Horizontal | RV1, RV2, RV4 |
| 2 | 10n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C7, C10 |
| 2 | 1Meg | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R9 |
| 2 | 1u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C11, C12 |
| 2 | 220n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C6 |
| 2 | D | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 10n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 1Meg | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 1n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 22n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C8 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 47n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 50k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1Power1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2Signal1 |
| 1 | DIODE | Diode_THT:D_DO-15_P10.16mm_Horizontal | D8 |
| 1 | LED_Dual_CAC | LED_THT:LED_D3.0mm-3 | D3 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_E-Switch_EG1271_DPDT | SW1 |
| 1 | TL082 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
Questions
What parts does the Faden use?
35 parts, built around the TL082. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Faden KiCad files?
From the ct2034/ctronics repository on GitHub, at the commit this page was made from: the board is faden/kicad/faden/faden.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Faden design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers130.6 × 112 mm
- 2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT - 2 layers60 × 50 mm
- 2 layers79 × 107 mm
Eurorack spinfx
grappendorf/eurorack-spinfx
Spin FV-1 based effects module for Eurorack systems
80 parts16 - 2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16