/Button/Button.kicad_pcb.jpg?size=s&soon)
Button
cshariq/Serene
Can't hear your friend talking on the highway? Do you need to blast your music just to hear it well? Well, you're in luck, because Serene is a portable noise-cancelling device that can remove all of that noise!

Can't hear your friend talking on the highway? Do you need to blast your music just to hear it well? Well, you're in luck, because Serene is a portable noise-cancelling device that can remove all of that noise!
Serene Mini is an open-source printed circuit board by cshariq, from the cshariq/Serene repository on GitHub. It is a 6-layer board of 25 × 42.5 mm with 81 parts on 226 nets, routed with 1,085 tracks and 325 vias.
It is built around the BGM220SC12WGA2R, ADAU1787BCBZRL7 and ADXL382-1BCCZ-RL, with the AP2112K-1.8, AP7361C-33E and BQ25620RYKR among its other parts. Its parts include 39 capacitors, 12 resistors, 9 ICs, 5 connectors and 4 inductors. It belongs with the STM32 and Silicon Labs (EFR32, EFM) boards of this library.
Onshape link provided below
Can't hear your friend talking on the highway? Do you need to blast your music just to hear it well? Well, you're in luck, because Serene is a portable noise-cancelling device that can remove all of that noise!
Just stick it to the roof of your car, and Serene will capture the road noise and output sounds waves that cancel them out, so that you can enjoy a peaceful car ride.
Serene is a small, portable device that connects directly to your phone and car speaker. It sticks seamlessly to the walls of your car, and using ANC algorithms, it minimizes the external noise that it picks up inside the car.
During family road trips, I sat in the backseat as a child, and if I didn't yell, my parents in the front couldn't hear me. This was so annoying, as a long highway drive almost always came with losing my voice.
With my dad's hearing getting worse, I figured that we needed a way to drown out the road noise. I was desparate for a solution, so taking inspiration from noise-cancelling technology in headphones, I thought: "What if we did the same thing in cars?".
While a few very luxury cars offer ANC, I wanted to make ANC more accessible to all people, because everyone deserves sereneness!
| Subtotal | Source | Notes |
|---|---|---|
| $228.21 | JLCPCB Parts | 2x (JLCPCB requires 2 of each part) |
| $61.05 | JLCPCB PCB | 0.15mm via and epoxy filled & capped selectedas it is required by the ADAU1787 Chip. Lead free coating also selected for safety and its only a dollar extra. 6 Layer manufacturing is selected because it is cheaper than 2/4 layer manufacturing due to a coupon. Although other options were explored, most DSPs(Digital Singal Processors) which is required for fast processing of audio(required for ANC) are WLCSP chips requiring 0.15mm vias which are epoxy filled & capped. Other solutions are too slow for this application. |
| $22.50 | Amazon | |
| $20.56 | AliExpress | |
| $11.86 | Adafruit | For the LEDs |
| $250.08 | All | Not accounting for 2x JLCPCB Parts |
| $364.18 | All | 2x (JLCPCB required 2 of each part) |
| Grand Total | Price | Notes |
|---|---|---|
| JLCParts Grand Total | $238.13 | 2x (JLCPCB required 2 of each part) |
| JLCPCB Grand Total | $72.25 | JLCPCB Advanced is cheaper due to coupons |
| Amazon Subtotal | $16.28 | 22.5 CAD --> 16.28 USD |
| Adafruit Grand Total | $23.08 | |
| AliExpress Grand Total | $20.70 | 28.07 CAD --> 20.70 USD |
| Vapcell Grand Total | $22.99 | |
| Grand Total | $393.43 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C8, C9, C10, C11, C12, C13, C14, C15, C16, C18, C19, C20, C27, C28, C31 |
| 7 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C7, C36, C38, C39, C40 |
| 6 | 10pF | Capacitor_SMD:C_0402_1005Metric | C3, C6, C24, C25, C33, C34 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C23, C26, C29, C30, C32 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R9, R10, R16 |
| 3 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R7, R11, R15 |
| 2 | 2.2kΩ | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 4.7µF | Capacitor_SMD:C_0402_1005Metric | C17, C35 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 600Ω | Inductor_SMD:L_0402_1005Metric | L3, L4 |
| 2 | Conn_Coaxial | ANC_Parts:CONN_X.FL-R-SMT-180_HIR | J1, J6 |
| 2 | IM73A135V01 | Sensor_Audio:Infineon_PG-LLGA-5-2 | MK1, MK2 |
| 1 | 1.5uH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 170Ω | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 180nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | ADAU1787BCBZRL | ANC_Parts:ADAU1787_Ultralib | U5 |
| 1 | ADXL382-1BCCZ-RL | ANC_Parts:ADXL382_Ultralib | U4 |
| 1 | AP2112K-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AudioJack3_Switch | Connector_Audio:Jack_3.5mm_CUI_SJ2-3593D-SMT_Horizontal | J4 |
| 1 | BATT+ | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP5 |
| 1 | BATT- | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP6 |
| 1 | BATT_TS | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | TP7 |
| 1 | BGM220SC12WGA2R | ANC_Parts:BGM220S_SIL | U7 |
| 1 | BQ25620RYKR | ANC_Parts:WQFN-HR18__RYK_TEX | U6 |
| 1 | Conn_01x06_Socket | ANC_Parts:CONN_503480-0540_MOL | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | SR1120 | ANC_Parts:Spark_SR1120_QFN32 | U9 |
| 1 | STM32H753ZITx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U3 |
| 1 | Transformer_1P_1S | RF_Converter:Balun_Johanson_1.6x0.8mm | T1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J5 |
/Button/Button.kicad_pcb.jpg?size=s&soon)
cshariq/Serene
Can't hear your friend talking on the highway? Do you need to blast your music just to hear it well? Well, you're in luck, because Serene is a portable noise-cancelling device that can remove all of that noise!
zgeez/Pixel-Badge
Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

knivier/SkyCell
The telecommunications solution on a balloon...for broke people alike.
zeeman-effect/pixel-snap-voice
A simple audio recording device that magnetically attaches to the back of a Pixel device

artixzhang/rock-module
Extension PCB boards for Radxa Rock 3C for Audio and Display Screen functions


GeniePod/genie-hardware
GeniePod Home V1 hardware: MVP testing build, wiring, BOM, and planned interface-board/enclosure docs.

baba2712/smart-helmet-with-anc
An industrial safety helmet with hybrid active noise cancellation (feed-forward + adaptive feedback FxLMS) on an STM32H743.
It measures 25 × 42.5 mm and has 6 copper layers, 1.6 mm thick.
81 parts, built around the BGM220SC12WGA2R, ADAU1787BCBZRL7, ADXL382-1BCCZ-RL and AP2112K-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cshariq/Serene repository on GitHub, at the commit this page was made from: the board is Serene Mini Hardware(PCB + Schematic)/Serene Mini.kicad_pcb and its schematic Serene Mini Hardware(PCB + Schematic)/Button/Button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cshariq before reusing the design.