

Salix VCF
Blattwerk Eurorack modules. Designed by Lorenz Neumann
- Size
- 39.7 × 109.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 102
- Pads
- 391
- Tracks, vias
- 1,747, 256
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Feb 2021
- Updated
- 6 Mar 2025
Overview
Salix VCF is an open-source printed circuit board by Cs4System, from the Cs4System/Eurorack repository on GitHub. It is a 2-layer board of 39.7 × 109.8 mm with 126 parts on 102 nets, routed with 1,747 tracks and 256 vias.
It is built around the LM324, CD4052BM and B10K, with the MMBT3904 and MMBT3906 among its other parts. Its parts include 60 resistors, 21 capacitors, 9 diodes, 8 connectors and 7 transistors. It belongs with the audio and music boards of this library.
Main components
5LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierCD4052BM
SOP-16-55℃~+125℃ 15ns 2 40MHz 4:1 5V~15V 80Ω Level shifting SOP-16 Analog Switches, Multiplexers ROHSJSMSEMIAnalog Switches, MultiplexersB10K
RES-TH_RK10J12E002LTH-3P SMT ROHSJLCPCB AssemblyUncategorisedMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdEurorack
-
All files are published under CC BY-NC-SA 4.0 if not marked differently
-
DO NOT USE COMMERCIALLY!
-
Build for yourself or for a friend, but do not sell builds, PCBs, pannels or any parts of the designes in this repository!
-
Feel free to modify, copy and use all files provided here. If you want to publish derivative work, please do so under same license as original
-
Any feedback and collaboration is very welcome!
-
Please feel free to open an issue on the issues tab
Have you built a module and would like to say thank you? https://paypal.me/LorenzNeumann
Blattwerk - Betula
- 8 channels In/Out ADAT Interface
- Outputs are DC coupled
- Inputs can be switched with jumpers between AC and DC coupling (In 2 groups: channel 1-4 and channel 5-8)
- Low noise: -110dB
- Low THD: >0.01% @ 1kHz, -6dB(+-5Vpp)
- 22kOhm input-impedance, 1kOhm output-impedance
- 8HP
- All channels with bicolored indicator LED
- ADAT sync indicator LED
- No μController, no programming required, hardware only
- CC BY-NC-SA 4.0 DO NOT USE COMMERCIALY!
- small and dense SMD build (0603,TSSOP)
- 180mA @ +12V and 100mA @ -12V (Without connected ADTA-signal: 14mA @ +12V and 0mA @ -12V)
Blattwerk - Salix
- VCF based on the Moog Transistor Ladder Filter
- Compensation for loss of bass in high resonance settings via potentiometer
- 6,12,18,24 dB/Oct selectable via potentiometer or CV!
- 2 Inputs with attenuator for audio and CV
- Seperate V/Oct input.
- Input-Drive indicator LED
- 8HP
- small and dense SMD build (0603, SOIC, SOT-363!) Not a beginner build, please be sure to have some SMD-soldering practice!
- 45mA @ +12V and 25mA @ -12V
- quick demo: https://youtu.be/XMdGtwIK5IQ
Transistor Ladder VCF
- Deprecated version of Salix VCF
- VCF based on the Moog Transistor Ladder Filter
- Compensation for loss of bass in high resonance settings via potentiometer
- 6,12,18,24 dB/Oct selectable via potentiometer or CV!
- 2 Inputs with attenuator for audio and CV
- Seperate V/Oct input.
- Input-Drive indicator LED
- 8HP
- CC BY-NC-SA 4.0
- small and dense SMD build (0603, SOIC, SOT-363!)
- 45mA @ +12V and 25mA @ -12V
- PCB and Panel is available at synthCube
- Quick demo: https://youtu.be/XMdGtwIK5IQ
Dual Ears
- BETA!
- Modification of Mutable Instruments Ears
- 2 seperat channels of original design, no internal contact microphone
- no jumpers, fixed values for fast Envelope Follower and Gate-Threshold of 1V
- 4HP
- CC-BY-SA 3.0, Orginal schematics by Emilie Gillet
- small and dense SMD build (0603, TSSOP)
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R10, R12, R14, R18, R19, R28, R34, R39, R40, R41, R56 |
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C10, C18, C19, C20, C21 |
| 10 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R9, R16, R25, R26, R27, R29, R31, R48, R61 |
| 10 | 56k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R44, R45, R50, R51, R53, R54, R55, R58, R60 |
| 7 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R13, R17, R21, R30, R47 |
| 5 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R15, R24, R32 |
| 5 | BCM847BS,135 | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | Q1, Q2, Q3, Q4, Q5 |
| 5 | LED | LED_THT:LED_D3.0mm | D3, D4, D5, D6, D7 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R22, R42, R52 |
| 4 | 47n | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C7, C8, C11, C12 |
| 4 | B100k | Eigenes:Potentiometer_Alps_RK09K_Horizontal | RV2, RV3, RV4, RV6 |
| 3 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36, R37, R46 |
| 3 | Audio-Jack-2_Switch | Eigenes:Thonkicon | J1, J5, J6 |
| 3 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3 |
| 3 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2, U3, U5 |
| 2 | 100k | Eigenes:Trim_pot | RV9, RV12 |
| 2 | 10u | Capacitor_SMD:CP_Elec_4x5.7 | C13, C14 |
| 2 | 1N4148 | Diode_SMD:D_SOD-323_HandSoldering | D8, D9 |
| 2 | 22u | Capacitor_SMD:CP_Elec_4x5.7 | C9, C16 |
| 2 | 29k4 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33, R35 |
| 2 | A100k | Eigenes:Potentiometer_Alps_RK09K_Horizontal | RV7, RV8 |
| 2 | Audio-Jack-2_Switch | Eigenes:Thonkicon_noGND | J2, J3 |
| 2 | B10k | Eigenes:Potentiometer_Alps_RK09K_Horizontal | RV1, RV5 |
| 2 | D | Diode_SMD:D_SOD-123 | D1, D2 |
| 1 | 100P | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 10k | Eigenes:Trim_pot | RV10 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 1k | Eigenes:Trim_pot | RV11 |
| 1 | 220u | Capacitor_SMD:CP_Elec_6.3x7.7 | C15 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R59 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R57 |
| 1 | 2k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R43 |
| 1 | 7k15 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38 |
| 1 | Audio-Jack-2_Switch | Eigenes:Thonkicon_odd | J4 |
| 1 | Audio-Jack-2_Switch | Eigenes:Thonkicon_odd2 | J7 |
| 1 | CD4052B | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | U6 |
| 1 | Conn_02x05_Odd_Even | Eigenes:Multicomp_MC9A12-1034_2x05x2.54mm_Straight | J8 |
| 1 | DG409 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q7 |
More from Cs4System/Eurorack
5- 4 layers39.4 × 110.3 mm

- 2 layers20 × 110 mm

- 2 layers39.4 × 43.2 mm

- 2 layers39.4 × 43 mm

- 2 layers39.5 × 12.8 mm

Similar boards
- 2 layers50 × 110 mm

- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers128 × 129 mm

Noise toaster
adeboni/eurorack
This repository stores various eurorack module designs I've made
133 parts1GPL-3.0 - 2 layers85.1 × 85.1 mm

- 2 layers109.4 × 108.5 mm

- 4 layers138 × 114 mm

Glitchwave567
jdg511/567Terror
Software simulation of the Glitchwave 567 (LM567 glitch pedal) — JUCE Standalone + VST3
299 partsMIT - 2 layers172.7 × 107.9 mm

- 4 layers134.6 × 113 mm

JordanAceto micro pico micro pico
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
333 parts1
Questions
How big is the Salix VCF PCB?
It measures 39.7 × 109.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Salix VCF use?
126 parts, built around the LM324, CD4052BM, B10K and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Salix VCF KiCad files?
From the Cs4System/Eurorack repository on GitHub, at the commit this page was made from: the board is Salix/PCB/Salix_VCF.kicad_pcb and its schematic Betula/Betula_ADAT/Betula_ADAT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Salix VCF design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cs4System before reusing the design.