4 layers230 × 42 mm
4 layers10 × 12 mm
HypaLoc
crteensy/HypaLoc3A tiny GNSS/magnetometer combo
- Size
- 10 × 12 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 24
- Nets
- 38
- Pads
- 107
- Tracks, vias
- 105, 44
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 May 2022
- Updated
- 9 Jun 2022
Overview
HypaLoc is an open-source printed circuit board by crteensy, from the crteensy/HypaLoc repository on GitHub, published under the MIT licence. It is a 4-layer board of 10 × 12 mm with 24 parts on 38 nets, routed with 105 tracks and 44 vias.
It is built around the ZOE-M8Q-0 and CDBQC0130L-HF. Its parts include 8 capacitors, 3 resistors, 3 ICs, 2 diodes and 1 connector.
Main components
2README
README.mdHypaLoc
A tiny GNSS/magnetometer combo
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1u | Yolo-GPS:C_0201_0603Metric_mod | C4, C7, C8 |
| 2 | 100u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C3, C6 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 2k7 | Yolo-GPS:R_0201_0603Metric_mod | R2, R3 |
| 1 | 360R | Yolo-GPS:R_0201_0603Metric_mod | R1 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | Ant | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 1 | CDBQC0130L-HF | Yolo-GPS:D_SOD-932F_0402_1005Metric | D2 |
| 1 | GNSS_Rx | Yolo-GPS:pad_1x1.5 | TP6 |
| 1 | GNSS_Tx | Yolo-GPS:pad_1x1.5 | TP5 |
| 1 | Gnd | Yolo-GPS:pad_1x1.5 | TP7 |
| 1 | MMC3416xPJ | Yolo-GPS:BGA-12_4x4_1.6x1.6mm | U2 |
| 1 | NCP160xMX | Yolo-GPS:OnSemi-XDFN-4-1EP_1x1mm_P0.65mm_EP0.52x0.52mm | U1 |
| 1 | SCL | Yolo-GPS:pad_1x1.5 | TP4 |
| 1 | SDA | Yolo-GPS:pad_1x1.5 | TP3 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Vin | Yolo-GPS:pad_1x1.5 | TP2 |
| 1 | ZOE-M8Q | Yolo-GPS:ZOE-M8 | U3 |
| 1 | green | LED_SMD:LED_0201_0603Metric | D1 |
Questions
How big is the HypaLoc PCB?
It measures 10 × 12 mm and has 4 copper layers, 1 mm thick.
What parts does the HypaLoc use?
24 parts, built around the ZOE-M8Q-0 and CDBQC0130L-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HypaLoc KiCad files?
From the crteensy/HypaLoc repository on GitHub, at the commit this page was made from: the board is HypaLoc.kicad_pcb and its schematic HypaLoc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HypaLoc design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers40 × 40 mm
STMF405 Flight Controller
MatthiasGeorgImhof/STMF405_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN and flash memory instead of flash card.
214 parts1 - 4 layers40 × 40 mm
STMF765 Flight Controller
MatthiasGeorgImhof/STMF765_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.
235 parts1 - 4 layers23.2 × 43 mm
- 4 layers22 × 22.2 mm
Tasgdo
nrwiersma/tasgdo
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.
41 partsMIT - 4 layers18 × 10 mm
BitPresTagBMP585-alternate
tag-designs/hardware
Hardware designs for tags and bases
28 parts2CERN-OHL-P-2.0 - 4 layers42 × 50 mm
SimpleFC G
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
134 parts10BSD-3-Clause - 4 layers28.3 × 52.3 mm
