2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0
2 layers37 × 41 mm
Cgranja Pelec
Croco41/BootcampElec- Size
- 37 × 41 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 34
- Pads
- 90
- Tracks, vias
- 178, 9
- Pours
- 118
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Nov 2025
- Updated
- 26 Nov 2025
Overview
Cgranja Pelec is an open-source printed circuit board by Croco41, from the Croco41/BootcampElec repository on GitHub. It is a 2-layer board of 37 × 41 mm with 17 parts on 34 nets, routed with 178 tracks and 9 vias.
It is built around the ATMEGA328P-AU. Its parts include 6 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | MyLibraryFootprint:MLF-CapacitorResistor-0603-1608mm | C3, C4, C5 |
| 2 | 10K | MyLibraryFootprint:MLF-CapacitorResistor-0603-1608mm | R2, R3 |
| 2 | 12pF | MyLibraryFootprint:MLF-CapacitorResistor-0603-1608mm | C1, C2 |
| 1 | 16MHz | MyLibraryFootprint:MLF-Crystal | Y1 |
| 1 | 1uF | MyLibraryFootprint:MLF-CapacitorResistor-0603-1608mm | C6 |
| 1 | 33Ω | MyLibraryFootprint:MLF-CapacitorResistor-0603-1608mm | R1 |
| 1 | ATmega328P-A | MyLibraryFootprint:MLF-ATmega328P-AU-32Av3 | U1 |
| 1 | FTDI | MyLibraryFootprint:MLF-J3 | J3 |
| 1 | Green | MyLibraryFootprint:MLF-LED-0603-1608mm | D1 |
| 1 | Red | MyLibraryFootprint:MLF-LED-0603-1608mm | D2 |
| 1 | SW_Push | MyLibraryFootprint:MLF-Switch_button_B3U-1000P | SW1 |
| 1 | ~ | MyLibraryFootprint:MLF-J2 | J2 |
| 1 | ~ | MyLibraryFootprint:MLF-J | J1 |
Questions
How big is the Cgranja Pelec PCB?
It measures 37 × 41 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cgranja Pelec use?
17 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cgranja Pelec KiCad files?
From the Croco41/BootcampElec repository on GitHub, at the commit this page was made from: the board is projects/TEST_KICAD1/cgranja-Pelec.kicad_pcb and its schematic projects/TEST_KICAD1/TEST_KICAD1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cgranja Pelec design in my own project?
Its repository states no licence, so its author keeps all rights: ask Croco41 before reusing the design.
Similar boards
- 2 layers50.5 × 128.5 mm
- 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm
- 2 layers73 × 94 mm
Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm
Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT