2 layers25.9 × 17 mm
SnapVCC
electronut/ElectronutLabs-snapVCC
A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.
45 parts77
2 layers
Buck Boost
CrockerC/Buck-Boost- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 74
- Tracks, vias
- 82, 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Aug 2021
- Updated
- 8 Aug 2021
Overview
Buck Boost is an open-source printed circuit board by CrockerC, from the CrockerC/Buck-Boost repository on GitHub. It is a 2-layer board with 12 parts on 10 nets, routed with 82 tracks and 3 vias.
It is built around the TPS63060DSC. Its parts include 4 capacitors, 3 resistors, 1 IC, 1 diode and 1 inductor. It belongs with the power boards of this library.
Main components
1README
README.mdBuck-Boost
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | .1uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C2 |
| 1 | 10pF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C3 |
| 1 | 111k | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 1M | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 1uH | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 | L1 |
| 1 | 20uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C1 |
| 1 | 66uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C4 |
| 1 | DIODE | Diode_THT:D_DO-15_P2.54mm_Vertical_AnodeUp | D1 |
| 1 | R_POT | Potentiometer_THT:Potentiometer_Bourns_3266W_Vertical | RV1 |
| 1 | TPS63060 | Package_SON:Texas_S-PWSON-N10_ThermalVias | U1 |
| 1 | Vin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | BT1 |
| 1 | Vout | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | R3 |
Questions
What parts does the Buck Boost use?
12 parts, built around the TPS63060DSC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buck Boost KiCad files?
From the CrockerC/Buck-Boost repository on GitHub, at the commit this page was made from: the board is BuckBoost.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buck Boost design in my own project?
Its repository states no licence, so its author keeps all rights: ask CrockerC before reusing the design.
Similar boards
- 2 layers65 × 95 mm
CassetteCat RevA
samyyy2311/CassetteCat
A music player for Android. Plays your own files, Jellyfin and Navidrome/Subsonic servers, and internet radio, with synced lyrics, an equalizer, Android Auto and a Listening Record. No account or tracking.
52 parts23GPL-3.0 - 2 layers65 × 120 mm
Nomad
0Zane/Nomad
One Adventure - One device,Nomad is a custom outdoor mobile device built around the ESP32-S3. It is designed for explorers, researchers, and outdoor enthusiasts who need reliable positioning, long-range communication…
81 parts17MIT - 4 layers17.8 × 41.9 mm
- 4 layers86.4 × 54.6 mm
RoboCape
PREDICT-EPFL/RoboCape
This repository is dedicated to a Beaglebone cape extension developped at EPFL in the Automatic Control Laboratory.
114 parts4 - 4 layers17.8 × 41.9 mm
- 2 layers100 × 100 mm
- 4 layers27.9 × 63.9 mm
Tiny4FSKGeneralShield
mpkendall/Tiny4FSK-Ecosystem
Set of expansion boards, sensor breakouts, and additional modules to operate with the Tiny4FSK tracking system.
35 parts3GPL-3.0