

Sensor board
- Size
- 69.9 × 40 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 86
- Nets
- 73
- Pads
- 302
- Tracks, vias
- 534, 246
- Pours
- 328
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2024
- Updated
- 12 Jul 2024
Overview
Sensor board is an open-source printed circuit board by cristiancristea00, from the cristiancristea00/sensor-board repository on GitHub. It is a 4-layer board of 69.9 × 40 mm with 86 parts on 73 nets, routed with 534 tracks and 246 vias.
It is built around the STM32U073CCT6, BME680 and BMI323, with the MIC5323-3.3YD5-TR, USBLC6-2SC6 and ASMT-YTB7-0AA02 among its other parts. Its parts include 29 resistors, 25 capacitors, 7 diodes, 6 ICs and 6 switches. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
6STM32U073CCT6
LQFP-48(7x7)-40℃~+85℃ 1.71V~3.6V 256KB 32 Bit 39 40KB 56MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure SensorsBMI323
LGA-14-40℃~+85℃ IMU (accelerometer + gyroscope) Motion event detection LGA-14 Accelerometers ROHSBosch SensortecAccelerometersMIC5323-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150uA 170mV@(300mA) 20uVrms 3.3V 300mA 5.5V 80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)ASMT-YTB7-0AA02
SMD3528-6P-40℃~+100℃ 120° 2.1V、3.1V、3.1V 20mA 384mcd、650mcd、1.9cd 465nm~475nm、525nm~537nm、617nm~627nm Diffused Lens Discrete Diode Red, green, blue SMD3528-6P LED Indication - Discrete ROHSBroadcom LimitedLED Indication - Discrete
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 |
| 13 | 220 | Resistor_SMD:R_0402_1005Metric | R12, R14, R15, R17, R19, R21, R23, R24, R25, R26, R27, R28, R29 |
| 7 | 5k1 | Resistor_SMD:R_0402_1005Metric | R7, R8, R13, R16, R18, R20, R22 |
| 4 | 100 | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6 |
| 4 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C8, C9 |
| 4 | RED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 4 | TODO | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | TODO | Resistor_SMD:R_0402_1005Metric | R1, R2, R11 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D6, D7 |
| 1 | STM32U073CCT6 | SensorBoard:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 32MHz | SensorBoard:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 32kHz768 | SensorBoard:Crystal_SMD_2016-4Pin_2.0x1.6mm | X2 |
| 1 | ASMT-YTB7-0AA02 | SensorBoard:ASMT-YTB7-0AA02 | D8 |
| 1 | BME680 | SensorBoard:BME630 | U4 |
| 1 | BMI323 | SensorBoard:BMI323 | U5 |
| 1 | DAC Connector | SensorBoard:SM02B-SR | J4 |
| 1 | M1 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | M1 |
| 1 | M2 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | M2 |
| 1 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | M3 |
| 1 | M4 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | M4 |
| 1 | MIC5323-3.3YD5 | SensorBoard:SOT-23-5 | U2 |
| 1 | SWD Connector | SensorBoard:SM03B-SR | J2 |
| 1 | SW_1 | SensorBoard:PTS636-SM25F-SMTR-LFS | SW1 |
| 1 | SW_2 | SensorBoard:PTS636-SM25F-SMTR-LFS | SW2 |
| 1 | SW_3 | SensorBoard:PTS636-SM25F-SMTR-LFS | SW3 |
| 1 | SW_4 | SensorBoard:PTS636-SM25F-SMTR-LFS | SW4 |
| 1 | SW_BOOT | SensorBoard:PTS636-SM25F-SMTR-LFS | SW5 |
| 1 | SW_RST | SensorBoard:PTS636-SM25F-SMTR-LFS | SW6 |
| 1 | TC1047 | SensorBoard:SOT-23-3 | U6 |
| 1 | UART Connector | SensorBoard:SM03B-SR | J3 |
| 1 | USB C 2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
Similar boards
- 2 layers54 × 40 mm

- 2 layers54 × 60 mm

- 4 layers70 × 50 mm

- 2 layers35 × 35 mm

CAN Base 0x00
EmilsSturitis/Sensors
Single repo for all of the sensor and interface breakout pcb's
23 parts - 6 layers60 × 30 mm

Udsp card
crsknr/hw_udsp-card
A compact DSP development board for real-time embedded audio and sensing
221 parts2GPL-3.0 - 4 layers52 × 48 mm

Hand hub
6thSense-dev/mocap-glove
Magnetic MoCap glove firmware, tracking diagnostics and local hand visualizer
106 parts - 4 layers57 × 35 mm

- 4 layers90.8 × 25.5 mm

MTR C3 TempHum
MoreThanRobotsFR/MTR_C3_TempHum
A tiny temperature, humidity, gas, pressure, ambient light and presence detector (mmWave presence sensor) measurement unit for HomeAssistant using ESPHome
79 partsMIT
Questions
How big is the Sensor board PCB?
It measures 69.9 × 40 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Sensor board use?
86 parts, built around the STM32U073CCT6, BME680, BMI323 and MIC5323-3.3YD5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor board KiCad files?
From the cristiancristea00/sensor-board repository on GitHub, at the commit this page was made from: the board is CAD/SensorBoard.kicad_pcb and its schematic CAD/SensorBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor board design in my own project?
Its repository states no licence, so its author keeps all rights: ask cristiancristea00 before reusing the design.