Skip to the content
2 layers68.6 × 100 mmArduino lab, the printed circuit board in 3D
Size
68.6 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
58
Pads
126
Tracks, vias
190, 3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Mar 2020
Updated
23 Apr 2020

Overview

Arduino lab is an open-source printed circuit board by crides, from the crides/arduino-lab repository on GitHub. It is a 2-layer board of 68.6 × 100 mm with 22 parts on 58 nets, routed with 190 tracks and 3 vias.

It is built around the TXB0104D. Its parts include 7 resistors, 5 diodes, 4 connectors, 3 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

22
QtyValueFootprintReferences
5250Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5
5LEDLED_SMD:LED_1206_3216MetricLED1, LED2, LED3, LED4, LED5
3SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3
2470Resistor_SMD:R_0603_1608MetricR6, R7
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2, J3
1Arduino_Uno_ShieldArduino:Arduino_Uno_ShieldXA1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1LCDfootprints:LCDLCD1
1TXB0104DPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1joystickfootprints:joystickJ1

Similar boards

  • 2 layers80.9 × 56.2 mmAdapter, the printed circuit board in 3D

    Adapter

    kervinck/gigatron-rom

    System, apps and tooling for the Gigatron TTL microcomputer

    40 parts292BSD-2-Clause
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers54.9 × 33 mmBoard2, the printed circuit board in 3D

    Board2

    dgoodlad/esp8266-mitsubishi-aircon

    ESP8266 / Mitsubishi AC interface

    26 parts24MIT
  • 4 layers79 × 142 mmGuitarray control board, the printed circuit board in 3D

    Guitarray control board

    IIP-Group/polymap

    Repository for the PolyMap Hardware and PolyMap Studio VST Plugin (prototype version).

    757 parts4CERN-OHL-P-2.0
  • 2 layers100 × 100 mmXaar128-Driver, the printed circuit board in 3D

    Xaar128-Driver

    tuwrraphael/inkjet-printer

    Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

    188 parts4Apache-2.0
  • 2 layers99 × 80 mmMmM, the printed circuit board in 3D

    MmM

    wyolum/mmM

    mmMercury is an Open Hardware, blood pressure measurement device (not FDA approved).

    167 parts2
  • 2 layers68.6 × 53.3 mmGergotron, the printed circuit board in 3D

    Gergotron

    expipiplus1/gergotron

    33 parts1

Questions

How big is the Arduino lab PCB?

It measures 68.6 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino lab use?

22 parts, built around the TXB0104D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino lab KiCad files?

From the crides/arduino-lab repository on GitHub, at the commit this page was made from: the board is kicad/arduino-lab.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino lab design in my own project?

Its repository states no licence, so its author keeps all rights: ask crides before reusing the design.