
Reader daughter
crice009/toolauth-hardware
The custom PCB for the toolauth system. Intended to control access to tools (based on credentials) in a shared workshop. Designed to work with an ESP32 board and ESPHome.

The custom PCB for the toolauth system. Intended to control access to tools (based on credentials) in a shared workshop. Designed to work with an ESP32 board and ESPHome.
Mh custom v1.3 is an open-source printed circuit board by crice009, from the crice009/toolauth-hardware repository on GitHub. It is a 2-layer board of 97 × 91.3 mm with 123 parts on 101 nets, routed with 889 tracks and 42 vias.
It is built around the CFM06S050-T, AMS1117-3.3 and AO3400A, with the B160-E3 and JQC-3FF/005-1ZS(551) among its other parts. Its parts include 39 resistors, 23 capacitors, 13 connectors, 3 diodes and 2 ICs.

The custom PCB for the toolauth system. Intended to control access to tools (based on credentials) in a shared workshop. Designed to work with an ESP32 board and ESPHome.
Completely designed in KiCAD 6 and ordered as assembled boards from JLCPCB.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R3, R22, R23, R24, R25, R28, R30, R32, R33, R34, R35, R36, R37, R38, R39 +1 |
| 13 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R5, R6, R14, R15, R16, R17, R18, R20, R21, R26, R27, R29 |
| 11 | no-filter-1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP8, JP9, JP10, JP11, JP15, JP16 |
| 10 | 33nF | LED_SMD:LED_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 9 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J5, J6, J7, J8, J9, J10, J11, J12, J14 |
| 6 | AO3400A | Package_TO_SOT_SMD:SOT-23 | T1, T2, T3, T4, T5, T6 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | 100nF | LED_SMD:LED_0603_1608Metric | C13, C16, C17, C22 |
| 3 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C18, C19, C23 |
| 3 | bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP6, JP7, JP12 |
| 2 | 0.1uF | LED_SMD:LED_0603_1608Metric | C1, C2 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 20pF | LED_SMD:LED_0603_1608Metric | C20, C21 |
| 2 | 499k | Resistor_SMD:R_0603_1608Metric | R13, R19 |
| 2 | B160-E3 | Diode_SMD:D_SMA | D3, D4 |
| 2 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | Boot1, EN1 |
| 2 | Conn_01x03_Female | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | EStop1, EStop2 |
| 2 | Conn_01x04_Female | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | I2C-2, I2C-3 |
| 2 | Conn_02x19_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J3, J4 |
| 2 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1, F2 |
| 2 | JQC-3FF/005-1ZS(551) | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | relay1, relay2 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP13, JP14 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C14 |
| 1 | 1uF | LED_SMD:LED_0603_1608Metric | C15 |
| 1 | 3.58MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ADE7953xCP | Package_CSP:LFCSP-28-1EP_5x5mm_P0.5mm_EP3.14x3.14mm | U2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CFM06S050 | CFM06S050-E - Cincon:CFM06S050E | PS1 |
| 1 | Conn_01x02_Female | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Bypass-1 |
| 1 | Conn_01x03_Male | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x06_Female | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | SPI-1 |
| 1 | H/L1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | IN-AUX-1 |
| 1 | H/L1 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | IN-1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | N/L2 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | IN-2 |
| 1 | Relay_Omron_MY2-02 | MY2-02 AC110 Omron:relay-Omron-MY2-02 | R31 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Omron_A6H-4101_W6.15mm_P1.27mm | SW1 |
| 1 | USB_A | USB-vertical-jlcpcb:USB-A-TH_UBAS-4R-D14D-4D-LF-SN | J13 |
| 1 | VOLTS | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | IN-3 |
| 1 | extra | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | pwr5v1 |

crice009/toolauth-hardware
The custom PCB for the toolauth system. Intended to control access to tools (based on credentials) in a shared workshop. Designed to work with an ESP32 board and ESPHome.

Toolauth/wing-combo
A large Feather Wing board that can control tools and helps manage authorization in a community workshop

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software



0xjmux/iot_leddriver_hw
ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization


Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
It measures 97 × 91.3 mm and has 2 copper layers, 1.6 mm thick.
123 parts, built around the CFM06S050-T, AMS1117-3.3, AO3400A and B160-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the crice009/toolauth-hardware repository on GitHub, at the commit this page was made from: the board is V1.3/mh-custom-v1.3.kicad_pcb and its schematic V1.3/ade7953.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask crice009 before reusing the design.