Skip to the content
2 layers26.2 × 8.8 mmAkiraFlex, the printed circuit board in 3D

RDRAM Termination Flex PCB for N64 Portables

Size
26.2 × 8.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
15
Pads
51
Tracks, vias
34, 4
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
8 May 2024
Updated
18 Aug 2024

Overview

AkiraFlex is an open-source printed circuit board by CrazyGadgetMods, from the CrazyGadgetMods/AkiraFlex repository on GitHub. It is a 2-layer board of 26.2 × 8.8 mm with 26 parts on 15 nets, routed with 34 tracks and 4 vias.

README

README.md

AkiraFlex

AkiraFlex is an N64 RDRAM termination flex PCB, designed to be a low-profile replacement for the stock expansion port + trimmed jumper pak combo commonly used in existing N64 portables. It was inspired by the "Akira Method" of digging up the expansion port pads and deadbugging the RDRAM termination circuit.


Installation

Components for the flex can either be pulled from an original N64 jumper / expansion pak, or can be bought brand new. All RAs are 1206-sized 51 Ohm, all caps are 0603-sized 1uF.

This flex was originally designed around a NUS-CPU-03 board, which has test points on the RDRAM traces between the RAM and the expansion port. If you are using this on a non-Rev 3 board (such as the Rev 4 board I installed in on here), you will need to scratch the traces as shown. Additionally, the VREF and VTERM vias must be scratched / tinned. Though apparently not necessary according to some testing Cy (of the BitBuilt Forums) has done, it is best practice to dig up the existing expansion port pads, as they will act as stubs for the RDRAM; not digging them up may lead to the board not booting / possible instabilities in-game. Once all the necessary vias / traces have been scratched / tinned / dug up, the flex can be installed on the board. Once installed, run a magnet wire from the pad shown below and the bottom of R33 on the N64 (rambus clock output from the mx8330).

Testing

Purchasing

If interested in purchasing an AkiraFlex kit (blank flex + RAs and capacitors), I am selling them on my Etsy store!

Credits

License

Solderpad Hardware License v2.1

Parts

26
QtyValueFootprintReferences
13TestPointLibrary:RAM ViaTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP18
4CCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
3R_Network04Library:R_Array_Concave_4x0603RN1, RN2, RN3
3TestPointLibrary:RAM Via 2TP15, TP16, TP17
2TestPointLibrary:RAM GNDTP13, TP14

The 25 most common of 26 parts.

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the AkiraFlex PCB?

It measures 26.2 × 8.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AkiraFlex use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AkiraFlex KiCad files?

From the CrazyGadgetMods/AkiraFlex repository on GitHub, at the commit this page was made from: the board is KiCAD/AkiraFlex.kicad_pcb and its schematic KiCAD/AkiraFlex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AkiraFlex design in my own project?

Its repository states no licence, so its author keeps all rights: ask CrazyGadgetMods before reusing the design.