

Passthru
A base platform for PoE peripherals
- Size
- 63.5 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 83
- Nets
- 115
- Pads
- 325
- Tracks, vias
- 488, 35
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Jan 2018
- Updated
- 20 Oct 2026
Overview
Passthru is an open-source printed circuit board by crawford, from the crawford/PoE repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 63.5 × 59.7 mm with 83 parts on 115 nets, routed with 488 tracks and 35 vias.
It is built around the LM5085MY, TPS23751PWP and PT61017PEL. Its parts include 30 capacitors, 23 resistors, 6 diodes, 4 ICs and 3 transistors. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
3LM5085MY
MSOP-8-EP-40℃~+125℃@(TJ) 1 1MHz 4.5V~75V Adjustable Buck Buck External No MSOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS23751PWP
HTSSOP-16-EP-40℃~+125℃ 100V 1A 25.5W IEEE 802.3 at(PoE+) Powered Device (PD) HTSSOP-16-EP Power Over Ethernet (PoE) Controllers ROHSTexas InstrumentsPower Over Ethernet (PoE) ControllersPT61017PEL
SMD,12.8x6.9mm0℃~+70℃ 10/100 Base-T 1CT:1CT 350uH Single port SMD,12.8x6.9mm Pulse Transformers(LAN) ROHSBournsPulse Transformers(LAN)
README
hardware/sync-flyback-eval/README.mdSynchronous Flyback Converter Evaluation
Test Plan
Core Converter
Populate:
- FB1-FB2
- R2-R3, R5-R14, R19-R21, R23-R25
- RV1-RV4
- L1-L2
- C1-C12, C15-C17, C22, C24, C26-C28
- D1-D2, D6
- Q1-Q3A
- U2
- T1-T2
Tune:
- Set RV1 to 22.1 kΩ.
- Set RV2 to 69.8 kΩ.
- Set RV3 to 69.8 kΩ.
- Set RV4 to 115 kΩ.
Test:
-
Insufficient supply a. Apply 5-volt supply across VDDA (TP10) and VSSA (TP11). b. Measure voltage across R7 and verify that it is 0 V.
-
24-volt supply a. Apply 470-ohm resistance across +12V (TP8) and GNDD (TP13). b. Apply 24-volt supply across VDDA and VSSA. c. Measure voltage across R8 and verify that it is 255 μV. d. Measure voltage across R7 and verify that it is ~181 μV.
-
48-volt supply a. Connect 470-ohm resistance across +12V (TP8) and GNDD (TP13). b. Connect 24-volt supply across VDDA and VSSA. c. Measure voltage across R8 and verify that it is 255 μV. d. Measure voltage across R7 and verify that it is ~128 μV.
Power over Ethernet
Populate:
- J1
- TR1
- C13-C14, C18-C21, C25
- R1, R15-R18
- D3-D5
Test:
-
Passive PoE a. Connect to passive (24-volt) PoE PS. b. Measure voltage across VDDA and VSSA and verify that it is ~24 V. c. Verify that the yellow LED turns on.
-
PoE+ a. Connect 470-ohm resistance across +12V and GNDD. b. Connect to PoE+ PS. c. Measure voltage across VDDA and VSSA and verify that is is 37-57 V. d. Verify that the yellow LED turns on.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0u1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C7, C10, C11, C18, C25 |
| 6 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C16, C20, C23, C26, C30 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C17, C19, C22 |
| 4 | 68R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R7, R8 |
| 4 | 75 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R10, R12, R15 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C8 |
| 3 | Ferrite_Bead_Small | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2, FB3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R23 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R22 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C29 |
| 2 | D_Bridge_+-AA | Diode_SMD:Diode_Bridge_Diotec_ABS | D4, D6 |
| 2 | Q_PMOS_DGS | common:PowerPAK_SO-8_Single | Q1, Q2 |
| 1 | 0R1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 0u47 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.8 | C28 |
| 1 | 10m | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 15u | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 16k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 178k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 1k27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 24k9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 2k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 33u | Capacitor_SMD:CP_Elec_10x10 | C13 |
| 1 | 3V3 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP5 |
| 1 | 3n3 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27 |
| 1 | 47u | Capacitor_SMD:CP_Elec_10x12.5 | C24 |
| 1 | 49R9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 49R9 | Resistor_SMD:R_Cat16-4 | RN1 |
| 1 | 50 MHz | common:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | 66k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 6k49 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 90k9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | ARM_SWD | common:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323F | D5 |
| 1 | D_Zener | Diode_SMD:D_SMA | D3 |
| 1 | EARTH | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP4 |
| 1 | EFM32GG11B8xx | common:QFP-64 | U1 |
| 1 | GND | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | ID | LED_THT:LED_D4.0mm | D1 |
| 1 | KSZ8081RND | common:QFN-24 | U2 |
| 1 | LM5085 | Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm | U3 |
| 1 | NET | LED_THT:LED_D4.0mm | D2 |
| 1 | PT61017PEL | common:PT61017PEL | TR1 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | RJ45_LED_Shielded | common:RJHSE-338X | J2 |
| 1 | Screw_Terminal_01x02 | common:Phoenix_1935161 | J3 |
| 1 | TPS2375-1 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U4 |
| 1 | VDD | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | VSS | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP3 |
The 81 most common of 83 parts.
More from crawford/PoE
2- 2 layers60.3 × 52.7 mm

- 2 layers88.9 × 46.4 mm

Similar boards
- 2 layers74.7 × 51.4 mm

Mate net monitor
ihartwig/mate-net-monitor
Baseboard PCBA for MATE Net monitoring with a Particle Boron
66 partsMIT - 4 layers94 × 90.2 mm

- 4 layers102.5 × 35 mm

- 4 layers71 × 83 mm

- 2 layers104 × 80.5 mm

Barklind
ludde1224/Barklind-ESP32-POE-Fan-Expansion
Circuit that allows for controlling and powering 4 pin pwm fans using POE and an ethernet connected esp32
29 partsApache-2.0 - 4 layers65 × 56 mm

- 4 layers116.8 × 121.8 mm

Se30
rhalkyard/SEthernet
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
50 parts167GPL-3.0 - 2 layers44.5 × 44.5 mm

Questions
How big is the Passthru PCB?
It measures 63.5 × 59.7 mm and has 2 copper layers, 1.69 mm thick.
What parts does the Passthru use?
83 parts, built around the LM5085MY, TPS23751PWP and PT61017PEL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Passthru KiCad files?
From the crawford/PoE repository on GitHub, at the commit this page was made from: the board is hardware/passthru/passthru.kicad_pcb and its schematic hardware/chassis/chassis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Passthru design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).