Skip to the content
2 layers100 × 100 mmFront, the printed circuit board in 3D

One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
197
Pads
382
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
14 Mar 2026
Updated
3 Nov 2026

Overview

Front is an open-source printed circuit board by crankery, from the crankery/crank68 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 60 parts on 197 nets.

It is built around the A13, 74LS240DC and 74LS245SC, with the 74HC14 and 74LS00SC among its other parts. Its parts include 32 diodes, 10 ICs, 8 capacitors, 2 connectors and 1 resistor.

Main components

5

README

README.md

C68

One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

It's going to be pretty useless but it's fun to play around with all of this.

Hardware

So, this isn't intended to be historically accurate or anything. It's a 1970s CPU but I'll use modern components where it makes things simpler. So, for whatever reason I thought it'd be nice to use things like the MC6850, MC6821 and other components that would have been available when the M6800 was being used in the industry. But really, I'm just trying to avoid using microcontrollers that would render the actual CPU hopelessly redundant.

One place I used a microcontroller is on the terminal board. It's just being used to produce DVI video and render text. Oh, it also does the keyboard matrix scan. It has its one job and that's to replace a glass terminal. So, since it's busy doing dumb terminal stuff it doesn't really matter that it's anacronistic... right?

The computer is split up across a bunch of 100x100mm boards. This is an attempt to reduce the cost of production as that's the maxiumum size the Chinese fabs will produce at bargain pricing. The one exception (thus far) is the actual keyboard; its dimensions are dictated by the keyboard layout.

I'm currently using some SPLDs as there were analogs of these back in the day. I am using them for decode logic for the most part but I'm trying to replace them with simple 74 series logic slowly.

Boards

As previously mentioned, the computer is built upon a set of cards. These cards are generally single function so there's a lot of them.

Backplane

The backplane is a simple board with a bunch of slots on it. Each board will plug into this board. The boards are setup to be chained together. The slots are 13.5mm apart giving about 12mm of component height for each board. If a board grows taller than this or has multiple layers, it will block the next slot. This is tall enough to allow for most common components though.

The left side of each board is allowed to host connectors. This allows for connecting I/O devices to individual boards such as parallel ports, serial ports, video output or sound output.

Status: C68BP.01 sent to production

Processor

This board hosts the Motorola M6800 CPU and the MC6875 clock generator along with an oscillator running at 4MHz. This will result in a 1MHz system clock.

Status: C68CPU.01 sent to production

Memory

Lower 48KB of RAM (in FRAM), 8KB ROM (EEPROM)

Status: C68MEM.01 sent to production

Banked Memory

1 MB of batery backed SRAM presented in two four KB windows in the main address space.

Status: Finalized design

Math

AMD AM9511 FPU

Status: design in progress

Sound

This is a sound board. I'm still trying to decide which chip(s) to use. The YM2149 OPL2, Philips SAA1099, GI AY-3-8910 SGM

Status: spitballing

IO

2xACIA MC6850, 2xPIA MC6821

Status: design completed

Time

A DS12885 RTC and a MC6850 PTC.

Status: design completed

Front Panel

blinkenlights and switches and buttons.

Status: in progress

Terminal

Using a Raspberry PI Pico with PicoDVI to generate the terminal's video and to perform keyboard scans. Uses an on-board MC6850 for communication to the host system.

Status: sent to production

Software

The software for this project includes some old stuff and some new stuff. The old stuff is being "translated" into a VASM 6800 standard syntax while the new stuff is being written that way.

Emulator

emu is a very basic M6800 emulator and is being used to verify software development. It isn't complete yet and will halt when it encounters an unimplemented instruction.

It is designed to match the actual computer's IO and memory access and will do the minimum to make things appear as they will in reality. So, the ACIA status and control registers set the flags appropriately while the actual rate of transfer isn't worried about.

New Stuff

C68 BIOS

Old Stuff

MIKBUG2
Micro Basic

Tools

Everything is being done using open source tools. This includes, but is not limited to:

  • kicad
  • vasm
  • vlink
  • galasm
  • minipro
  • GCC

Parts

60
QtyValueFootprintReferences
7100nFCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5, C6, C7
4330ΩResistor_THT:R_Array_SIP9RN1, RN2, RN3, RN4
374LS240Package_DIP:DIP-20_W7.62mmU5, U6, U7
2330Ω0-Footprints:Resistor Pack 7RN5, RN6
2DM9368Package_DIP:DIP-16_W7.62mmU1, U3
110KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR15
11µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC8
174HC14Package_DIP:DIP-14_W7.62mmU10
174LS00Package_DIP:DIP-14_W7.62mmU8
174LS245Package_DIP:DIP-20_W7.62mmU9
1A0LED_THT:LED_D3.0mmD1
1A1LED_THT:LED_D3.0mmD2
1A10LED_THT:LED_D3.0mmD11
1A11LED_THT:LED_D3.0mmD12
1A12LED_THT:LED_D3.0mmD13
1A13LED_THT:LED_D3.0mmD14
1A14LED_THT:LED_D3.0mmD15
1A15LED_THT:LED_D3.0mmD16
1A2LED_THT:LED_D3.0mmD3
1A3LED_THT:LED_D3.0mmD4
1A4LED_THT:LED_D3.0mmD5
1A5LED_THT:LED_D3.0mmD6
1A6LED_THT:LED_D3.0mmD7
1A7LED_THT:LED_D3.0mmD8
1A8LED_THT:LED_D3.0mmD9
1A9LED_THT:LED_D3.0mmD10
1BANKLED_THT:LED_D3.0mmD27
1BankConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_HorizontalJ2
1Buss0-Footprints:CardJ1
1D0LED_THT:LED_D3.0mm_ClearD17
1D1LED_THT:LED_D3.0mm_ClearD18
1D2LED_THT:LED_D3.0mm_ClearD19
1D3LED_THT:LED_D3.0mm_ClearD20
1D4LED_THT:LED_D3.0mm_ClearD21
1D5LED_THT:LED_D3.0mm_ClearD22
1D6LED_THT:LED_D3.0mm_ClearD23
1D7LED_THT:LED_D3.0mm_ClearD24
1HALTLED_THT:LED_D3.0mmD31
1High BankDisplay_7Segment:HDSP-7401U4
1IOLED_THT:LED_D3.0mmD28
1Low BankDisplay_7Segment:HDSP-7401U2
1NMILED_THT:LED_D3.0mmD30
1RAMLED_THT:LED_D3.0mmD25
1RESETButton_Switch_THT:SW_PUSH_6mmSW1
1RESETLED_THT:LED_D3.0mmD29
1ROMLED_THT:LED_D3.0mmD26
1WRITELED_THT:LED_D3.0mmD32

More from crankery/crank68

12
  • 2 layers290.3 × 119.1 mmKeyboard, the printed circuit board in 3D

    Keyboard

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    162 partsMIT
  • 2 layers100 × 100 mmSound, the printed circuit board in 3D

    Sound

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    58 partsMIT
  • 2 layers100 × 100 mmBankedMemory, the printed circuit board in 3D

    BankedMemory

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    44 partsMIT
  • 2 layers100 × 100 mmTerminal, the printed circuit board in 3D

    Terminal

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    38 partsMIT
  • 2 layers100 × 100 mmBusDepot, the printed circuit board in 3D

    BusDepot

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    35 partsMIT
  • 2 layers100 × 100 mmProcessor, the printed circuit board in 3D

    Processor

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    32 partsMIT
  • 2 layers100 × 100 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    30 partsMIT
  • 2 layers100 × 100 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    29 partsMIT
  • 2 layers100 × 100 mmRTC, the printed circuit board in 3D

    RTC

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    28 partsMIT
  • 2 layers100 × 100 mmMath, the printed circuit board in 3D

    Math

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    26 partsMIT
  • 2 layers100 × 100 mmTime, the printed circuit board in 3D

    Time

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    25 partsMIT
  • 2 layers100 × 65 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    22 partsMIT

Similar boards

  • 2 layers99.1 × 99.1 mmRC6802 CPU, the printed circuit board in 3D

    RC6802 CPU

    tebl/RC6802-Microchicken

    Computer based on the Motorola 6802 processor, called RC6802 Microchicken as it's an adaption of the one found in a computer projects book by Daniel Metzger.

    53 parts6
  • 2 layers244 × 244 mm6809PC-6U, the printed circuit board in 3D

    6809PC-6U

    danwerner21/6809PC

    6809 PC

    167 parts2
  • 2 layers160.5 × 100.2 mm8080 Board, the printed circuit board in 3D

    8080 Board

    sladek/SBC_8080_ECB

    This is my attempt to build a single-board microcomputer based on the Intel 8080 CPU. It contains the following features:

    112 parts
  • 2 layers235 × 160 mmProcessor.80C188, the printed circuit board in 3D

    Processor.80C188

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    111 parts15
  • 2 layers300 × 200 mmModel 150, the printed circuit board in 3D

    Model 150

    Julesc013/project-carbon

    Hardware and software for custom CPUs, FPUs, and computer systems.

    377 parts
  • 2 layers99.1 × 99.1 mmRC1 CPU, the printed circuit board in 3D

    RC1 CPU

    tebl/RC-ONE

    A recreation of the MOS KIM-1 microcomputer, the start of the Commodore-line of computers. Complete with hex keypad, six digit displays and a lot of 8-bit fun!

    45 parts25
  • 4 layers160 × 100 mmSBC-386EX-2, the printed circuit board in 3D

    SBC-386EX-2

    danwerner21/SBC80386EX

    ECB 80386EX sbc

    96 parts1

Questions

How big is the Front PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Front use?

60 parts, built around the A13, 74LS240DC, 74LS245SC and 74HC14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Front KiCad files?

From the crankery/crank68 repository on GitHub, at the commit this page was made from: the board is Front/Front.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Front design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).